How To Reset Nissan Titan Tire Pressure TPMS Light (Paper Clip Method)

Last Updated on December 16, 2019 by Christ

How To Reset Nissan Titan Tire Pressure TPMS Light (Paper Clip Method) – Nissan Motor adding models double cabin of his car with the Titan product XD 2016 models. The seriousness of Nissan to compete in this segment is evidenced by Titan XD brings to the production line at the factory Canton, Mississippi, United States. The first production car was also named Nissan Titan Platinum Preserve XD will present the black color is termed as forged copper.

The Brother of Navara double cab cars will be equipped with the Cummins turbodiesel engine capacity of 5.0 liter V8 that can give power 310 hp (231 kW) and has a maximum torque of 751 nm (55 lb-ft). The large machines will be combined with a system of six-speed automatic transmission and four-wheel-drive system. Although born as a double cabin vehicle, but it looks quite sporty and stylish with LED headlights, large chrome-plated grille, 20-inch rim sizes, and tailgate are given a special coating.

How To Reset Nissan Titan Tire Pressure TPMS Light (Paper Clip Method)

How To Reset Nissan Titan Tire Pressure TPMS Light (Paper Clip Method):

Time needed: 15 minutes

To reset the Tire Pressure Monitoring System (TPMS) light on your 2003 20014 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 Nissan Titan, follow these steps:

  1. Adjust the tire inflation pressure recommended on the tire placard located on the door panel.

  2. Locate the TPMS interface plug. This is a white female plug that is attached to the OBD II wire loom under the dash. You may have to cut the tape that is holding the TPMS interface plug to the OBD II wire loom.

    tire pressure tpms reset

  3. Insert a paper clip or wire to the plug interface.

  4. Turn the ignition ON but do not start the engine

  5. Tap the end of the paper clip on any exposed ground (metal) 6 times.

  6. If the way you are correct, the TPMS warning light will start blinking slowly.

    If it flashes fast that’s not right. If yours isn’t flashing slowly then check your connections, turn the ignition off and start over at step 4.

  7. Once you confirm the lights do not stop flashing, driving for a few miles (kilometers), calibration will complete after 20 minutes of cumulative driving at 16-25 mph.

  8. The light will quickly come back on due to the low tire pressures. Refill your tires to the correct pressure.

For more details, please watch the following video:

This tutorial is based on the Nissan workshop manual. The procedure above can be applied to all generations of Nissan Titan ( 2003 20014 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 model years). Hopefully the article of How To Reset Nissan Titan Tire Pressure TPMS Light (Paper Clip Method) useful for you. Good Luck!

(Visited 4,701 times, 1 visits today)

1 Comment on “How To Reset Nissan Titan Tire Pressure TPMS Light (Paper Clip Method)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.