How to Reset GMC Sierra TPMS Tire Pressure Warning Light Without Tool
How to Reset GMC Sierra TPMS Tire Pressure Warning Light Without Tool -The Silverado is a full-size pickup truck manufactured by Chevrolet since 1998. The model is derived from the GMC Sierra, which is on the market since 1975. GMC created a larger scale version of the Sierra 1500 in 2001 and named Sierra C3. It was all-wheel drive and had installed a Vortec 6000 V8 engine from 6 L of displacement and 325 hp. In 2002 the name was changed to the Sierra Denali, but the specification remained essentially the same, except for the addition of four-wheel steering system Quadrasteer. The Denali received engine V8 Vortec 6000 HO previously used on the Silverado SS.
The Denali could tow up to 3,674 kg and carry up to 714 kg. The Sierra Denali had initially among the standard equipment, the powerful four-wheel steering Quadrasteer. This system greatly reduced the turning radius and improved the driving agility by reducing the penetration times from one lane during towing trailers. In 2005, General Motors eliminated the system cited by the entire product range, due to low sales due to the relatively high price of the system.
How to Reset GMC Sierra TPMS Tire Pressure Warning Light Without Tool:
Time needed: 17 minutes.
If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. Follow these steps to relearn or reset the Tire Pressure Monitoring System (TPMS) sensor on your GMC Sierra 1500 2500HD 3500HD:
- Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.
- Turn the ignition to the ON position without starting the engine.
- Press and hold unlock and lock buttons on the Remote Keyless Entry (RKE) transmitter until horn sounds
- If your vehicle does not have the Remote Keyless Entry (RKE) transmitter
Press the VEHICLE INFO button until PRESS TO RELEARN TIRE POSITIONS appears on the display
Press the button
The horn sounds twice to signal the receiver is in relearn mode
- Increase/ decrease tire pressure for 10 seconds, starting from the driver’s side front tire (LF) until horn sounds.
- After horn sounds, proceed to the right (passenger’s side) front tire, and repeat the procedure in step 3.
- Next, proceed as in step 3 for the right (passenger’s side) rear tire and then left (driver’s side) rear tire.
- After hearing the confirming horn chirp for the left rear tire, turn the ignition to the OFF position. Adjust all tires to pressure listed on the tire placard.
For more details, please watch the following video:
This tutorial is based on the GMC owner’s manual. This procedure should be work on the old generation of GMC Sierra 1500 2500HD 3500HD (2008 2009 2010 2011 model years). Hopefully the article of How to Reset GMC Sierra TPMS Tire Pressure Warning Light Without Tool useful for you. Good Luck!