2009-2019 Ford Flex Oil Change Minder Oil Life Light Reset Guide
Last Updated on October 11, 2020 by Christ
2009-2019 Ford Flex Oil Change Minder Oil Life Light Reset Guide – The Ford Flex is an SUV crossover produced by the US car manufacturer Ford from 2008 to 2019. There are two engines available on the Ford Flex, both V6. They are coupled with a six-speed automatic transmission.
The first has a displacement of 3.5 liters, which produces 262 HP and a torque of 336 N • m. This powerplant is a Ford Duratec. The second engine is a supercharged EcoBoost powertrain.
Contents
2009-2019 Ford Flex Oil Change Minder Oil Life Light Reset Guide
Did you get a Engine Oil Change Due Next Service or Oil Change Required message on your 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 Ford Flex? This means you must immediately perform oil change on your vehicle. Don’t forget to reset the oil minder system afterward. Depending on your vehicle model, here are a few ways to reset the oil life light.
1st Generation (2009-2012)
Time needed: 7 minutes
The first generation of Ford Flex was marketed from 2009 to 2012. It was launched with three trim levels: SE as base model, SEL as mid-level, and Limited as top-trim. Here’s how to reset the engine oil life on the Ford Flex first generation:
- Turn on the ignition without starting the engine
Make sure the vehicle completely stops
- Press the SETUP button briefly until “OIL LIFE % HOLD RESET = NEW” appears on the screen
The button is located on the instrument panel
- Press the RESET button for 2 seconds and release to reset the oil life to 100%.
Done!
2nd Generation (2013-2019)
The second generation is the last generation of the Ford Flex. In this generation, you can reset oil life via a multi-information display with control buttons on the steering wheel. Here’s how to reset the engine oil life on the Ford Flex second generation:
- Turn the engine switch to the “ON” position
- Find the SETTINGS menu by using the ▲▼ navigation button and press the OK button to select
- Select VEHICLE or CONVENIENCE
- Select OIL LIFE RESET
- Press and holds the OK button until “Reset Successful” appears on the screen
These instructions are based on the Ford Flex owner’s manual. This procedure should apply to the first and second generation of the Ford Flex (2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 model years). Hopefully, the article 2009-2019 Ford Flex Oil Change Minder Oil Life Light Reset Guide can solve your problem. Good Luck!
I cannot reset my oil light after an oil change. PLEASE give me detailed step by step info. I have tried following the manual and and cannot do it Thank you.