2018 Toyota Tacoma Tire Pressure TPMS Warning Light Reset
2018 Toyota Tacoma Tire Pressure TPMS Warning Light Reset – Tacoma is a pickup truck manufactured and sold by Toyota in North America. It was world premiered at the North American Detroit Motor Show in September 2015. The aggressive appearance incorporating the 4 runner SUV (Hilux Surf) and Tundra’s design attracted attention and boosted sales significantly by helping the boom.
In addition to the conventional 2TR – FE type (2.7 liters straight 4), the newly developed 3.5 – liter V – 6, which adopted D – 4S which uses direct in-cylinder injection and port injection, has been the lineup. These two engines can be selected with either 2WD / 4WD or MT / AT, and there are 29 variations including TRD specifications and equipment differences. Ultra-high strength steel is adopted as the body to raise the rigidity, the quietness has been greatly improved.
2018 Toyota Tacoma Tire Pressure TPMS Warning Light Reset:
If you replaced a wheel, tire, TPMS sensor etc. and are now getting a warning light on your car, then the sensor needs to be reset. To reset the Tire Pressure Monitoring System (TPMS) light on your 2016 2017 2018 Toyota Tacoma, follow these steps:
- Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Turn the engine switch to the “ON” position
- Locate and press the tire pressure warning reset button until the tire pressure warning light blinks 3 times.
- Wait for a few minutes with the engine switch in the “ON” position
- Finally, turn the engine switch to the “ACC” or “LOCK” position.
For more details please check the following video:
The procedure above can be applied to all the generations of Toyota Tacoma (2016 2017 2018) models, which is equipped with a Tire Pressure Monitoring System (TPMS). Hopefully, the article of 2018 Toyota Tacoma Tire Pressure TPMS Warning Light Reset useful for you.