2018 Toyota CHR TPMS Low Tire Pressure Warning Light Reset – In Italy, the C-HR could be ordered from 1 October 2016, with first deliveries by December. However, due to the high level of interest from the car, Toyota has already launched before the official sale of the C-HR “First Edition”: limited edition (numbered) that has been almost sold out in just 10 days
The First Edition presents a very rich look thanks to the two-tone silver paint with black roof, the tinted rear windows and the two-color alloy wheels of 18 “. The interior is made of black leather with blue trim and is also equipped with steering wheel and heated seats with dual-zone air conditioning. The Toyota Touch 2 multimedia system can count on the navigation system with a JBL audio system (the optional premium one with 9 speakers).
2018 Toyota CHR TPMS Low Tire Pressure Warning Light Reset:
If you replaced a wheel, tire, TPMS sensor etc. and are now getting a warning light on your car, then the sensor needs to be reset. To reset the Tire Pressure Monitoring System (TPMS) light on your 2018 2019 Toyota C-HR, follow these steps:
- Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Start the engine
- Select the by using navigation button on the right side of the steering wheel.
- Select VEHICLE SETTINGS
- Select TPMS PRESSURE then press and hold the OK button until the tire pressure warning light blinks 3 times.
- Calibration will complete after 30 minutes of cumulative driving at 25 mph (40 km/h)
The procedure above can be applied to the latest generations of Toyota C-HR (2018 2019 model years), which is equipped with a Tire Pressure Monitoring System (TPMS). Hopefully, the article of 2018 Toyota CHR TPMS Low Tire Pressure Warning Light Reset useful for you.