How To Reset Fiat Tipo TPMS Low Tyre Pressure Light (2015-2020)
How To Reset Fiat Tipo TPMS Low Tyre Pressure Light (2015-2020) – The Fiat Tipo (code-named 356 types 4 Doors, 5 Doors Type 357 and Type 358 Station Wagon) Fiat called Aegea in Turkey, is a compact sedan, produced by Italian automaker Fiat from 2015 and sold in the EMEA market, starting in December of that year. This is the first of the three models provided by Project Aegea and goes to directly replace the Fiat Linea in EMEA where it was distributed.
The design was established in Italy by FCA Italy, in Turin (which is also the EMEA headquarters of Fiat Chrysler Automobiles). The stylistic design took place in Turin, at the Centro Stile Fiat, under the direction of Roberto Giolito. The development, in contrast, has taken place between Turin and Bursa, where Fiat has its own research and development center for the Middle East, being the vehicle designed mainly for the Turkish and Eastern European markets.
How To Reset Fiat Tipo TPMS Low Tyre Pressure Light (2015-2020):
Time needed: 7 minutes.
If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. To relearn, turning off or reset the Tire Pressure Monitoring System (TPMS) light on your Fiat Tipo, follow these steps:
- Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.
- Let the tires cool, then adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Turn the engine switch to the “ON” position
- Locate and press the SET button until the tire pressure warning light blinks 2 times and a beep sound is heard once.
This tutorial is based on the Fiat owner’s manual. The procedure above can be applied to the latest generations of Fiat Tipo (2015 2016 2017 2018 2019 2020 model years), which is equipped with a Tire Pressure Monitoring System (TPMS). Hopefully, the article How To Reset Fiat Tipo TPMS Low Tyre Pressure Light (2015-2020) useful for you.