How To Reset Peugeot 3008 Tyre Pressure Warning Light (2017-2020)

Last Updated on February 17, 2020 by Christ

How To Reset Peugeot 3008 Tyre Pressure Warning Light (2017-2020) – The first generation of the Peugeot 3008, a mid-range crossover car, was produced from 2009 to 2016 by the French automaker Peugeot. The second generation of the Peugeot 3008 is unveiled officially on May 23, 2016, before being marketed at the end of 2016. Its production is carried out in the PSA plant in Sochaux (Franche-Comté) and the DPCA plant in Wuhan by CAPD for the Chinese market since late 2012.

He has received five stars out of five on the EuroNCAP tests and has the Origin France Garantie label. It enjoys a restyling in the fall of 2013. The Peugeot Prologue has a prominent grille made up of a chrome grille and imposing “almond” lights. The grille of this Peugeot is also less wide than on previous models. The sides of the vehicle are very sculpted, except the curve of the wings. The interior is completely new with an imposing slightly inclined central console.

How To Reset Peugeot 3008 Tyre Pressure Warning Light (2017-2020)

Contents

How To Reset Peugeot 3008 Tyre Pressure Warning Light (2017-2020)

Time needed: 7 minutes

If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. To reset the Tire Pressure Monitoring System (TPMS) light on your 2016 2017 Peugeot 3008, follow these steps:

  1. Stop the vehicle in a safe place and turn the engine switch off

    .

  2. Adjust the tire inflation pressure recommended on the tire placard located on the middle pillar, driver’s side.

    .

  3. Turn the engine switch to the “ON” position

    .

  4. Press the DRIVING / VEHICLE button on the touch screen display

    Peugeot tyre pressure reset button

  5. Select VEHICLE SETTING tab

    .

  6. Select “Under-inflation initialization”.

    .

  7. Select “Yes” to Confirm

    .

With the Audio System:

  • Stop the vehicle in a safe place and turn the engine switch off
  • Adjust the tire inflation pressure recommended on the tire placard located on the middle pillar, driver’s side.
  • Turn the engine switch to the “ON” position
  • Press the MENU button located on the audio system
  • Highlight the Personalisation-configuration menu by pressing the “<<” or “>>” button
  • Press the “OK” button
  • In the Personalisation, menu select Define the vehicle parameters
  • Press the “OK” button to confirm
  • select the Driving Assistance menu
  • Select Tyre pressures menu
  • Then select the Reinitialization menu
  • Press the “OK” button to confirm

For more details, please watch the following video:

This tutorial is based on the Peugeot owner’s manual. The procedure above can be applied to the latest generations of Peugeot 3008 (2016 2017 2018 2019 2020 model years), which is equipped with a Tire Pressure Monitoring System (TPMS). Hopefully, the article How To Reset Peugeot 3008 Tyre Pressure Warning Light (2017-2020) useful for you.

Name
Comment
(Visited 21,334 times, 1 visits today)

2 Comments on “How To Reset Peugeot 3008 Tyre Pressure Warning Light (2017-2020)

  1. I have just re-set mine by adjusting all tyre pressures to 42lb, switching off the engine, re-starting and the monitor re-set it’s self. Pressing the check button (the odd re-set) gave an OK reading on all four tyres.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.