How to Reset Power Liftgate Back Door on Toyota Land Cruiser – Toyota Land Cruisers are four-wheel drive vehicles designed and distributed by Toyota. The platform adopts independent four-wheel suspension with a front axle layout configured with double swinging arm and stabilizer bar and the Multilink with 4 arms and anti-roll bar has been adopted at the rear axle.
The hydraulic suspensions are electronically adjustable on six different levels depending on the type of road surface, they are also adjustable in height and damping with coil springs. The dynamic stability and traction controls (VSC and A-TRC), the electronic anti-skid system for uphill (HAC) and downhill (DAC), Crawl Control that sets the speed on three levels (1, 3 or 5 km / h) in order to continue constantly on the off-road vehicle.
How to Reset Power Liftgate Back Door on Toyota Land Cruiser:
If you have issues with the Liftgate / Trunk Door and want to reset it, you can be set to open to a specific height by performing the following step:
- Open the liftgate using the switch or the Intelligent Key and adjust it to the desired position.
- While holding the liftgate in position, press and hold the power back door switch located on the liftgate until 4 beeps are heard.
- The liftgate will open to the selected position setting.
For more details, please watch the following video:
Repeat this steps for setting the position of the liftgate if you want to change the position of the liftgate. The procedure above can be applied to latest generations of Toyota Land Cruiser (2015, 2016, 2017, 2018, 2019) model years. Hopefully the article of How to Reset Power Liftgate Back Door on Toyota Land Cruiser useful for you.