How to Reset Toyota Sequoia Power Liftgate Trunk Back Door – Sequoia is a full-size SUV manufactured by Toyota North America. It was announced as the 2008 model at the 2007 Los Angeles Auto Show and was released in 2008. The base is Tundra as well as the predecessor, but this time we also adopt the rear multi-link suspension for the rear suspension.
In addition to the 2UZ-FE of 4.7L · V8 of 276PS, 3UR-FE of 5.7L · V8 was newly added to the engine as a result of this full model change. There are grade [SR5] [Limited] [Platinum], both FR and 4WD can be selected for the driving method.
How to Reset Toyota Sequoia Power Liftgate Trunk Back Door:
If you have issues with the Liftgate / Trunk Door and want to reset it, you can be set to open to a specific height by performing the following step:
- Open the liftgate using the switch or the Intelligent Key and adjust it to the desired position.
- While holding the liftgate in position, press and hold the power back door switch located on the liftgate until 4 beeps are heard.
- The liftgate will open to the selected position setting.
For more details, please watch the following video:
Repeat these steps for setting the position of the liftgate if you want to change the position of the liftgate. The procedure above can be applied to the latest generations of Toyota Sequoia (2012 2013 2014 2015 2016 2017 2018 model years). Hopefully the article of How to Reset Toyota Sequoia Power Liftgate Trunk Back Door useful for you.