How To Reset Oil Change Minder Oil Life Light on Ford E-Series (2009-2021)
Last Updated on October 10, 2020 by Christ
How To Reset Oil Change Minder Oil Life Light on Ford E-Series (2009-2021) – The Ford E-Series or formerly known as the Econoline and Club Wagon, are minibusses designed to transport people and goods manufactured by the Ford Motor Company. The E-Series is the best-selling American minibus since the 1980s.
Ford E-Series Wagon Club currently holds 49.6% of the US minivan market. In 2005, 179,543 minibusses were sold. The E-Series will be updated for 2008, with the minivan sharing a grille and dazzling design with the new Super Duty pickups.
Contents
How To Reset Oil Change Minder Oil Life Light on Ford E-Series (2009-2021)
Did you get a Engine Oil Change Due Next Service or Oil Change Required message on your 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Ford E150 E250 E350 E450? This means you must immediately perform oil change on your vehicle. Don’t forget to reset the oil minder system afterward. Depending on your vehicle model, here are a few ways to reset the oil life light.
E150 / E250 (2009-2014)
Time needed: 7 minutes
The E150 and E250 are the passenger and cargo vans of the Ford E-series. Both were discontinued at the end of 2014. Here’s how to reset the engine oil life on the Ford E150 and E250:
- Turn on the ignition without starting the engine
Make sure the vehicle completely stops
- Press the SELECT/RESET button briefly until “OIL LIFE =% HOLD RESET = NEW” appears on the screen
The button is located on the instrument cluster
- Press the SELECT/RESET button for 2 seconds and release to reset the oil life to 100%.
Done!
E350 / E450 (2009-2021)
This is the fourth generation and is the latest generation which is still produced today. Depending on your vehicle trim level, here are how to reset the engine oil life on the Ford E350 and E450:
With Cluster Button
Just like on his brother, you can reset the oil life by using the SELECT/RESET button on the instrument cluster. Here’s how to do it:
After turning on the ignition without starting the engine, press the SELECT/RESET button repeatedly until the “OIL LIFE % HOLD RESET = NEW” appears on the screen. Press and hold the SELECT/RESET button for 2 seconds and release to reset the oil life to 100%.
With Brake & Gas Pedal
In addition through the menu in the instrument cluster, you can reset the oil life using the accelerator and brake pedals. Here’s how to do it:
- Turn on the ignition without starting the engine
- Depress the Brake and Accelerator pedals at the same time
- Keep holding both pedals until a message confirming that the reset is complete appears on the screen
- Release the pedals and switch off the ignition
These instructions are based on the Ford E-Series owner’s manual. This procedure should apply to the fourth generation of the Ford E-Series E150 E250 E350 E450 (2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How To Reset Oil Change Minder Oil Life Light on Ford E-Series (2009-2021) can solve your problem. Good Luck!
Nope, didn’t work and yes it has oil in it. No option to reset through cluster, gas, brake only flashes check eng light. Maybe drill through cluster and break light or Homer Simpson black tape over light ( joking on last two)