How To Reset Maintenance Light on Nissan Altima After Oil Change (2007-2021)

Last Updated on October 31, 2020 by Christ

How To Reset Maintenance Light on Nissan Altima After Oil Change (2007-2021) – The Altima is a mid-size car produced by Nissan since 1992. The fourth Altima series appeared on the markets in 2006, built on a new platform. On the V6 engine was increased power, which grew to 273 hp.

In May 2007, the coupe version was introduced. A hybrid version was also presented with a 2.5-liter four-cylinder engine, electric motor, and stepless gearbox. A six-speed manual gearbox was offered as standard.

How To Reset Maintenance Light on Nissan Altima After Oil Change (2007-2021)

Contents

How To Reset Maintenance Light on Nissan Altima After Oil Change (2007-2021)

When the engine oil exceed the specified service interval, the maintenance reminder light will appear on the display. You should perform an oil change and reset the system. Depending on your vehicle model, here are a few ways to reset the oil light on 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Nissan Altima.

4th Generation (2007-2012)

Time needed: 7 minutes

The fourth generation of Nissan Altima (chassis model L32A) was marketed from 2007 to 2012. In this generation you can reset the oil light in the following ways:

  1. Turn on the ignition without starting the engine

    If your vehicle has the keyless starting system, press the ENGINE START STOP button two times without depressing the brake pedal

  2. Go to SETTINGS mode by pressing the ❏ button repeatedly

    The button is located on the instrument cluster area
    nissan oil maintenance light reset

  3. In the setting mode screen press the ⚈ button to move to MAINTENANCE menu

    Press the ❏ button to select the menu

  4. Select ENGINE OIL menu

    Use the ⚈ button to highlight and the ❏ button to select

  5. Select RESET

    You can select reset or set the distance for service interval on this menu

  6. Press the ⚈ button to reset and then press ❏ button to confirm

    Repeat this guide if the OIL FILTER is needed to reset!

5th Generation (2013-2017)

The fifth generation of Nissan Altima (chassis model L33) was marketed from 2013 to 2017 in North America market. In this generation you can reset the oil light in the following ways:

  • Turn on the ignition without starting the engine
  • Go to the SETTINGS menu by pressing the ❏ button repeatedly
nissan oil maintenance light reset
  • In the setting menu screen use the joystick to scroll to MAINTENANCE menu
  • Push the ENTER button to select the menu
  • Select SERVICE or OIL AND FILTER
  • Select RESET

6th Generation (2018-2021)

The sixth generation is today’s latest models, this generation was introduced since 2018. Here’s how to reset the oil light on the latest generation of Nissan Altima:

  • Press the ENGINE START STOP button once without depressing the brake pedal
  • Go to the SETTINGS menu by using the ◄ ► navigation button
nissan oil maintenance light reset
  • Scroll down to the MAINTENANCE by using the ▲▼ navigation button and press OK button to enter
  • Select OIL CONTROL SYSTEM
  • Press OK button to reset
  • Press OK button again to confirm the oil reset

This tutorial is based on the Nissan Altima owner’s manual. This procedure should apply to the fourth, fifth, and sixth generations of Nissan Altima (2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How To Reset Maintenance Light on Nissan Altima After Oil Change (2007-2021) can solve your problem. Good Luck!

(Visited 599 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.