Reset Guide: GMC Envoy Oil Life Oil Change Light (2002-2009)
Last Updated on February 15, 2021 by Christ
Reset Guide: GMC Envoy Oil Life Oil Change Light (2002-2009) – GMC Envoy is a mid-range SUV manufactured by GMC. The Envoy was introduced in 1998 as a more luxurious version of the GMC S-15 Jimmy but became a separate model in 2002.
Envoy returned to the market in 2002, replacing the GMC S-15 Jimmy as a stand-alone model. While the car shared a platform with the Chevrolet TrailBlazer, its design varied. The earlier version used a 270 hp (201 kW) I6 Vortec 4200 engine, and later models were offered with a 275 hp (205 kW) engine.
Reset Guide: GMC Envoy Oil Life Oil Change Light (2002-2009)
Time needed: 7 minutes
When the system has calculated that oil life has exceeded the specified service interval, a CHANGE ENGINE OIL SOON message will come on. You must perform an oil change on your vehicle and reset the system. Depending on your vehicle model, here are a few ways to reset the oil life light on 2002 2003 2004 2005 2006 2007 2008 2009 GMC Envoy:
- Place the ignition to the RUN position without starting the engine
If your vehicle has the keyless starting system, hold down the ENGINE START/STOP button without pressing the brake pedal
- Fully depress the GAS pedal, three times within 5 seconds
Don’t rush, make sure you press it fully
- Turn off the ignition
Press the ENGINE START/STOP button once
- Verify the indicator has been reset by starting the engine
Done!
These instructions are based on the GMC Envoy owner’s manual. This procedure should apply to the second generations of the GMC Envoy (2002 2003 2004 2005 2006 2007 2008 2009 model years). Hopefully, the article Reset Guide: GMC Envoy Oil Life Oil Change Light (2002-2009) can solve your problem. Good Luck!
Leave a Reply