How To Reset Nissan Juke Airbag Warning Light (2011-2019)
Last Updated on December 29, 2019 by Christ
How To Reset Nissan Juke Airbag Warning Light (2011-2019) – Known by the brand-round luxury, Nissan is the Japanese manufacturer issued its latest innovation against a car creation, not only innovation, but technology and designs used are also undergoing significant change and more luxurious than ever. Cars are experiencing the update is the Nissan Juke. From the beginning of his visit, Nissan juke reaps much support. Many people are praising this car because of the design attached to it, people say, the Nissan Juke is unique and luxurious and is different from the others.
The design used by the Nissan Juke is completely different and does not have the same or similar to this car. In addition to the unique, if viewed from outside Nissan Juke also has its own uniqueness in the interior carries. High-class comfort brought by car is included in this type of SUV. The powered engine is wrapped with the latest technology to make every user feel satisfied when raced on the streets. Besides the engine, it also provided an extra spacious trunk to store your luggage with a large capacity.
How To Reset Nissan Juke Airbag Warning Light (2011-2019):
Time needed: 17 minutes
To turning off the Airbag Light on 2011 2012 2013 2014 2015 2016 2017 2018 2019 Nissan Juke, conform to the following instructions:
- Turn the ignition key to position “ON” without starting the engine, If your vehicle has Smart key button, press the “Start” button twice without touching the brake pedal.
- Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the key off instantly.
- Wait for more than 3 seconds
- Repeat steps 1-3 two more times until you have done the cycle three times.
- Now turn the key on and watch the light. It will start blinking in a different, slower manner. This is a diagnostic mode. You can watch this for a little while, no hurry.
- Now turn the key off again, wait for more than 3 seconds like in step 3 again, and turn back on.
- Turn the ignition off and then start the engine to verify the indicator has been reset
For more details, please watch the following video:
If the procedure worked, the airbag light will not be flashing. This tutorial is based on the Nissan repair manual. This procedure should apply to all models of Nissan Juke (2011 2012 2013 2014 2015 2016 2017 2018 2019). Hopefully the article of How To Reset Nissan Juke Airbag Warning Light (2011-2019) useful for you. Good Luck!
It really works. Thank you so much guys!
Thank you so much!!! Sorted was worried I’m going to spend
Wooow thanks alot really work for me
Oh Gosh thank you for the great directions!!! Best Buy completely hacked my dash/ controls while trying- not so successfully-to get my Bluetooth steering wheel controls to work again
My air bag doesn’t blink just stays on constantly
What can I do
Help please
Altima 2013
I tried this and it still blinking as before ??
Worked for me!
Thanks!
Good job ,guys!
Light came on the dash and flashing on the display after I changed the screen on the radio on my Nissan Juke. I was concerned that the car was not safe to drive and used the key method mentioned and it worked so many thanks for posting this. Can now go out over the weekend 😎
Thank you for the help could not have done it without you guy, again thank you
Hi!
Ive tried this several times & even had it hooked upto a diagnostic machine – but its not showing a fault?!
Any ideas people?
Thanks in advance
Thanks very,it worked for my Juke !
Thank you worked perfectly