2003-2009 Mazda B2300 Fuel Inertia Switch Reset Location
2003-2009 Mazda B2300 Fuel Inertia Switch Reset Location – The Mazda B-Series (Mazda B-Series) is a compact SUV introduced in 1961 by Mazda Motor Corporation. From the first Serie B, Mazda has used the engine displacement to determine the name. The vehicles of the range are the B 1500, the B1600, the B1800, Rotary Pickup, the B2000, the B2200, the B2600 and Bravo. It was replaced by the Mazda BT-50 in 2008.
Mazda B-Series has a rear-wheel-drive for normal road use, and ability to drive to all four wheels for heavy and demanding terrain. Towing capacity is 2.8 tons. In Europe, production of the Mazda B-series stopped in 2006 and instead produced a model Mazda BT-50. Outside Europe produced under various names: Mazda Bravo (Australia), Mazda Bounty (New Zealand), Mazda Magnum / Thunder / Fighter (Thailand) and Mazda Drifter (South Africa).
2003-2009 Mazda B2300 Fuel Inertia Switch Reset Location:
Time needed: 7 minutes.
Fuel pump shut-off (inertia) switch is a device that stops the fuel pump of the fuel delivery to the engine. If your engine cranks but does not start, this switch may have been activated. Here’s how to find and reset the switch:
- On the 2003-2009 Mazda B2300 Truck, the fuel pump shut-off switch is located in the front passenger footwell area in the right upper corner. If you do not find it, try searching on the right side of the passenger footwell, behind the fuse panel door. You will need to remove the lower scuff plate to access the switch.
- Make sure to turn off your vehicle
- Pushing in the Fuel pump shut-off (inertia) switch
- Turn the ignition to the on position and wait a few seconds and return the key to off position.
For more details, please watch the following video:
This tutorial is based on the Mazda owner’s manual. This procedure works on a Mazda B2300 Truck 1995 2003 2004 2005 2006 2007 2008 2009 model years. Hopefully, the article of 2003-2009 Mazda B2300 Fuel Inertia Switch Reset Location useful for you.