How To Reset Nissan Altima TPMS Low Tire Pressure Warning Light

Last Updated on February 20, 2020 by Christ

How To Reset Nissan Altima TPMS Low Tire Pressure Warning Light – New Nissan Altima is the favorite to compete with a car sedan in its class: New Mazda and New Toyota Camry. Nissan Altima’s latest release appears at the New York Auto Show in 2014. There are many improvements and upgrades made by Nissan on the car’s four-door sedan. The surplus is more powerful and aerodynamic. At the front of the car’s exterior Nissan, Altima 2014 looks more elegant with headlights glance looks similar to the latest Nissan Maxima.

Seen a few accessories that use chrome that looks luxurious. At the front grille and door handles, luggage. Some combinations of horizontal lines also make this car more symmetrical. On the inside of the new car, the 2014 Nissan Altima has a very neat design. The cabin looks different from the previous Altima Nissan series. The new Nissan Altima car looks more elegant and modern. Several additional updated on this car is the steering wheel three bars were in the previous generation using a four-wheel crossbar.

How To Reset Nissan Altima TPMS Low Tire Pressure Warning Light

How To Reset Nissan Altima TPMS Low Tire Pressure Warning Light:

To reset the Tire Pressure Monitoring System (TPMS) light on your 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 Nissan Altima, follow these steps:

  • Make sure the vehicle is at a complete stop
  • Turn the engine switch off
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Driving for a few miles (kilometers), calibration will complete after 20 minutes of cumulative driving at 25 mph.

If the above procedure does not work, try using the following procedure at your own risk!

Time needed: 17 minutes

  1. Adjust the tire inflation pressure recommended on the tire placard located on the door panel.

    .

  2. Locate the TPMS interface plug. This is a white female plug that is attached to the OBD II wire loom under the dash. You may have to cut the tape that is holding the TPMS interface plug to the OBD II wire loom.

    .tire pressure tpms reset

  3. Insert a paper clip or wire to the plug interface.

    .

  4. Turn the ignition ON but do not start the engine

    .

  5. Tap the end of the paper clip on any exposed ground (metal) 6 times.

    .

  6. If the way you are correct, the TPMS warning light will start blinking slowly.

    If it flashes fast that’s not right. If yours isn’t flashing slowly then check your connections, turn the ignition off and start over at step 4.

  7. Once you confirm the lights do not stop flashing, driving for a few miles (kilometers)

    calibration will complete after 20 minutes of cumulative driving at 16-25 mph.

  8. The light will quickly come back on due to the low tire pressures.

    Refill your tires to the correct pressure.

For more details, please watch the following video:

We got this tutorial from Nissan specialists. The procedure above can be applied to the latest generations of Nissan Altima (2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 model years). Hopefully, the article How To Reset Nissan Altima TPMS Low Tire Pressure Warning Light useful for you.

(Visited 8,649 times, 1 visits today)

1 Comment on “How To Reset Nissan Altima TPMS Low Tire Pressure Warning Light

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.