2009-2010 Ford F150 Fuel Pump Inertia Switch Reset Location
2009-2010 Ford F150 Fuel Pump Inertia Switch Reset Location – The F-Series is a series of full-size pickups produced by Ford since 1948. Ford introduced the new series of the F-150 at the Motor Show in Detroit in January 2008. The model has improved the interior, a revamped grille, and is allowed a choice of trim levels and between different cockpits. The frame is now lighter, it is constituted by steel better and allows a towing capacity better.
At the top of the range, the Platinum trim level of the Ford F150 has replaced the Lincoln Mark LT. However, in Mexico, the model is still sold as a Lincoln Mark LT. The F150 standard is instead marketed as Ford Lobo, while Venezuela is sold as F-250. The F-150 possesses, for side impacts, side airbags and protections for the first and second set of seats. The model also has an electronic system that prevents tipping and stability control.
2009-2010 Ford F150 Fuel Pump Inertia Switch Reset Location:
Time needed: 7 minutes.
Fuel pump shut-off (inertia) switch is a device that stops the fuel pump of the fuel delivery to the engine. If your engine cranks but does not start, this switch may have been activated. Here’s how to find and reset the switch:
- On the 2009-2010 Ford F-150, the fuel pump shut-off switch is located in the passenger’s footwell, by the kick panel. You will need to remove the lower scuff plate to access the switch.
- Make sure to turn off your vehicle
- Pushing in the Fuel pump shut-off (inertia) switch
- Turn the ignition to the on position and wait a few seconds and return the key to off position.
For more details, please watch the following video:
This tutorial is based on the Ford owner’s manual. This procedure works on a Ford F150 2009 and 2010 years model that uses 4.6 and 5.4 engines. Hopefully, the article of 2009-2010 Ford F150 Fuel Pump Inertia Switch Reset Location useful for you.