2001-2012 Ford Escape Fuel Pump Inertia Switch Reset Location – The Escape is a compact SUV produced by Ford since 2000. In Europe, it was sold as the Ford Maverick. The latter was in production from 1,993 to 2,007, but it is only since 2000 that it represented the European version of the Escape. Previously, it was, in fact, a model of its own. The Escape is positioned below the Ford Explorer.
Although it is a crossover vehicle, it is being marketed by Ford as part of its traditional range of SUV (Escape, Explorer, Expedition), rather than the separate range of crossover (Edge, Flex). The Escape was developed together with Mazda; the latter carmaker Ford, in fact, owns the shares, then the two companies have jointly developed several models. The Escape was launched along with the Mazda Tribute.
2001-2012 Ford Escape Fuel Pump Inertia Switch Reset Location:
Time needed: 7 minutes.
Fuel pump shut-off (inertia) switch is a device that stops the fuel pump of the fuel delivery to the engine. If your engine cranks but does not start, this switch may have been activated. Here’s how to find and reset the switch:
- On the 2001-2012 Ford Escape, the fuel pump shut-off switch is located in the front passenger footwell area behind a flip-up cover. You will need to remove the lower scuff plate to access the switch.
- Make sure to turn off your vehicle
- Pushing in the Fuel pump shut-off (inertia) switch
- Turn the ignition to the on position and wait a few seconds and return the key to off position.
For more details, please watch the following video:
This tutorial is based on the Ford owner’s manual. This procedure works on a Ford Escape 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 model years. Hopefully, the article of 2001-2012 Ford Escape Fuel Pump Inertia Switch Reset Location useful for you.