2009-2020 Dodge Challenger Tire Pressure TPMS Light Reset

Last Updated on February 17, 2020 by Christ

2009-2020 Dodge Challenger Tire Pressure TPMS Light Reset – The Challenger is a car produced by the Dodge since 1970. The Dodge Challenger is one of the American muscle car known, and one of the latest pony car. He was born in 1970 in Challenger Six versions, V8 Challenger, Challenger T / A, and Challenger R / T. The basic engine of a Dodge Challenger was a six-cylinder 3.7-liter engine, while the V8 version was equipped with an eight-cylinder 5.2-liter with dual carburetors capable of developing up to 230 hp (170 kW). reciprocating engines were the 5.6 or 6.3-liter V8.

The Challenger R / T was the most handsome and sporty version: it was equipped with engines from about 7 liters; of these, the least developed powerful 335 hp (250 kW) and was equipped with 3-speed manual transmission. The other alternative engines developed 375, 390 and 425 hp. The Challenger went out of production in 1974 and was reproduced (with much less success) between 1978 and 1983.

2009-2020 Dodge Challenger Tire Pressure TPMS Light Reset

2009-2020 Dodge Challenger Tire Pressure TPMS Light Reset

Time needed: 17 minutes

If you receive a low-tire pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your Dodge Challenger, follow these instructions:

  1. Make sure the vehicle is at a complete stop

    .

  2. Adjust the tire inflation pressure recommended on the tire placard located on the door panel.

    .

  3. Driving for a few miles (kilometers), calibration will complete after 20 minutes of cumulative driving at least 25 km/h (16 mph), and then verify that it turns off.

    .

Note: When filling warm tires, the tire pressure may need to be increased up to an additional 4 psi (30 kPa).

For more details, please watch the following video:

This tutorial is based on the Dodge owner’s manual. The procedure above can be applied to the latest generations of Dodge Challenger (2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully, the article of 2009-2019 Dodge Challenger Tire Pressure TPMS Light Reset useful for you. Good Luck! 😀

Name
Comment
(Visited 11,064 times, 1 visits today)

8 Comments on “2009-2020 Dodge Challenger Tire Pressure TPMS Light Reset

  1. I followed your instructions for resetting my TPMS,but the light continues to flash even after driving for 30 minutes. WHAT GIVES? I saw 4 reviews that your instructions did not work for them as well. 2010 challenger (all tires at 30psi).Have you ever done this before? If by chance I have a bad TPM sensor,how do I determine which wheel it is?

  2. Frig do you think we are stupid? We know how a fill a tire ! Is there a reset switch? The dealer can not even fix this on my car?

  3. I have a 2010 Basic Challenger RT no Bell’s or whistles. Tpms light is on and tried everything you guys have mentioned. On extremely tight budget being a disabled veteran and a my Wit’s end. Please help

  4. The batteries in the sensors last about 10 years.Even if you filled them all with the correct pressure,if one (or more) battery is shot, the the light stays on no matter if pressure is correct.On my 2010 Challenger R/T it shows you which sensor is down,you can access this on the menu button on the steering wheel.Might as well order all 4 of them as the others are sure soon to follow.I just ordered 4 OEM sensors on ebay for $54;- that includes tax and free shipping.Hopes this helps.You will of course need to have them installed by a tire shop.(more $)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.