2007-2012 Dodge Caliber Tire Pressure System TPMS Reset
2007-2012 Dodge Caliber Tire Pressure System TPMS Reset – The Dodge Caliber was a crossover SUV, small, began production starting in 2006 in the American market, and in the year after also in Europe. Until 2009 it has also produced a high-performance version, the Caliber SRT-4. Trading in Europe ended with the 2010 model year, while in the US the production ended in 2011. Along with a little less than 4 meters and a half, it appeared as an agile and compact vehicle, with great versatility.
It was proposed in Italy with three different engines, two petrol 1.8-liter and 2.0-liter with automatic continuously variable transmission type dual VVT Mitsubishi junction, and a 2.0-liter turbodiesel, called CRD, produced by Volkswagen (it comes in the TDI pump-injector effect, displacement 1968 cc, which expressed a maximum power of 140 hp at 4000 r / min and maximum torque of 310 Nm at 2500 rpm/min) and combined with a manual transmission Getrag 6-speed.
2007-2012 Dodge Caliber Tire Pressure System TPMS Reset:
If you receive a low-tire-pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your 2007 2008 2009 2010 2011 2012 Dodge Caliber, follow these instructions:
- Make sure the vehicle is at a complete stop
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Driving for a few miles (kilometers), calibration will complete after 20 minutes of cumulative driving at least 25 km/h (16 mph), and then verify that it turns off.
Note: When filling warm tires, the tire pressure may need to be increased up to an additional 4 psi (30 kPa).
For more details, please watch the following video:
The procedure above can be applied to the latest generations of Dodge Caliber (2007 2008 2009 2010 2011 2012 model years). Hopefully the article of 2007-2012 Dodge Caliber Tire Pressure System TPMS Reset useful for you. Good Luck! 😀