Audi Q3: How To Reset Service Due Light After Oil Change (2015-2021)

Last Updated on March 16, 2021 by Christ

Audi Q3: How To Reset Service Due Light After Oil Change (2015-2021) – The Audi Q3 is a compact SUV produced by the German car manufacturer Audi. The 3rd model of the “Q” series is more compact than the Audi Q5 and Q7.

The Q3 Vail was presented at the North American International Auto Show in 2012. It takes its name from the North American ski resort and is equipped with a 2.5 TFSI engine combined with an all-wheel-drive and dual-clutch transmission S Tronic with seven gears.

Audi Q3: How To Reset Service Due Light After Oil Change (2015-2021)

Contents

Audi Q3: How To Reset Service Due Light After Oil Change (2015-2021)

The inspection or service reminder message will appears in the display after driving a certain distance. You need perform an oil change and reset the system interval. Depending on your vehicle model, here are a few ways to reset the service light on Audi Q3:

1st Generation (2015-2018)

Time needed: 7 minutes

In this first generation (2015 2016 2017 2018), you can access service intervals via a multimedia display to reset oil change. Here’s how to do it:

  1. Turn the ignition to the ON position without starting the engine.

    If your vehicle has the keyless starting system, press the ENGINE START STOP button without pressing the brake pedal

  2. Press the CAR button

    The button is located on the center console
    audi mmi tire tpms reset button

  3. Select CAR SYSTEM or SYSTEM menu

    Press the control button to select the menu

  4. Select SERVICE & CHECKS

    Use the dial control to scroll and select the menu

  5. Select SERVICE INTERVAL DISPLAY

    The remaining service interval will appears on the screen

  6. Scroll down and select RESET OIL CHANGE INTERVAL

    A confirmation display will appears on the display

  7. Select YES to execute the service interval reset

    Done!

2nd Generation (2019-2021)

Just like the previous generation, you can reset the service interval via MMI, but this latest generation (2019 2020 2021) is equipped with a touchscreen:

  • Turn on the ignition without starting the engine
  • From the main menu tap the VEHICLE or CAR menu on the touchscreen
service light oil change reset
  • Select SETTINGS & SERVICE
  • Select SERVICE INTERVAL
  • Select RESET OIL CHANGE INTERVAL
  • Select YES to execute the service interval reset

These instructions are based on the Audi Q3 owner’s manual. This procedure should apply to the first and second generations of the Audi Q3 (2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Audi Q3: How To Reset Service Due Light After Oil Change (2015-2021) can solve your problem. Good Luck!

(Visited 568 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.