2005 Subaru Outback Timing Marks Diagram (2.5 L DOHC EJ Engine)
2005 Subaru Outback Timing Marks Diagram (2.5 L DOHC EJ Engine) – The Subaru Outback is a medium-sized family produced by Subaru, a subsidiary of the Japanese automaker Fuji Heavy Industries (FHI). It comes from the Legacybut differs from the latter for the body raised from the ground and from the muscular design (has many protections). It is, therefore a crossover, which is a cross between a family car and an SUV, then characterized by good mobility on difficult terrain. Its production began in 1995 came in 2015 at the fifth different series. The Outback was submitted to the Euro NCAP crash test in 2002, receiving four out of five stars for safety vehicles.
Outback is assembled in Lafayette, Indiana (United States) and Ota in Gunma (Japan). The Subaru Outback Canada has four versions; 2.5i from $ 30,995, the PZEV Plus from $ 34,145, 2.5i Limited from $ 39,245 and the 3.0R Premier from $ 43,595. There are five versions in the United States; 2.5i from $ 22,295, the 2.5i Special Edition from $ 23,895, 2.5i Limited from 28,295, the 2.5XT Limited from $ 31,595 and 3.0R Limited from $32095. In France, there are three versions, diesel, the 2.0D Club to € 39,100 and the 2.5i petrol at € 34,400 or 3.0R to € 46,000. The Swiss range includes five versions in diesel, 2.0D AWD Limited from 47 800 CHF or Swiss 2.0D AWD from 40 300 CHF and gasoline, 3.0R AWD Executive from 57 000 CHF, the 3.0R AWD Swiss from 51 500 CHF and 2.5i AWD Swiss from 38 800 CHF.
2005 Subaru Outback Timing Marks Diagram (2.5 L DOHC EJ Engine):
1. Arrow mark
2. Timing belt
3. 28 tooth length
4. 54.5 tooth length
5. 51 tooth length
6. 28 tooth length
7. Install it in the end
A. Align mark (A) on the crank sprocket with the mark on the oil pump cover at cylinder block.
B. Align the single line mark (B) on intake cam sprocket (LH) with a notch on the timing belt cover
C. Align single line mark (C) on exhaust cam sprocket (LH) with a notch on the timing belt cover
D. Align single line mark (D) on the intake cam sprocket (RH) with a notch on the timing belt cover.
E. Align single line mark (E) on the exhaust cam sprocket (RH) with a notch on the timing belt cover.
Note: Align the alignment mark on the timing belt with marks on sprockets in an alphabetical order shown in the figure. While aligning marks, position the timing belt properly. This diagram applies to Subaru Outback 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 model years which uses EJ DOHC Engine. For more detail please watch the following video:
The EJ-type engine, which is a series of horizontally opposed four-cylinder gasoline engine of Fuji Heavy Industries. This engine As the successor model of the EA-type engine, to the present. DOHC engine of the rest of the EJ20, EJ25 is equipped with a variable valve timing mechanism AVCS. Here for convenience, describing also to EG33 horizontally opposed six-cylinder engine is mounted on the development version to Subaru Alcyone SVX.
While the EA-type engine bearings to support the crankshaft were three, in the EJ-type engine corresponding to the 5 bracts it becomes the higher output. However, the crankshaft length is extended for this purpose, bore pitch is wider. Although it has become possible to increase the exhaust amount significantly by the bore-expansion, real regardless of the context of the performance “torque of the low rotation region is narrow for short stroke” and is often criticized. Also adopted a water-cooling system and the EA-type engine to be a direct ancestor of (mounted from Subaru 1000), between the cylinder adjacent to order with an emphasis on compactness is relatively narrow crankshaft is thin web, large crankpin – the overlap of the Journal It has a shape with, sometimes colloquially called a razor crank. This diagram is based on the Subaru workshop manual. Hopefully the article of 2005 Subaru Outback Timing Marks Diagram (2.5 L DOHC EJ Engine) useful for you.