2003-2016 Volvo XC70 Maintenance Service Light Reset Guide

Last Updated on March 29, 2021 by Christ

2003-2016 Volvo XC70 Maintenance Service Light Reset Guide – The Volvo XC70 is a family-bodied crossover SUV car produced by the Swedish car manufacturer Volvo from 1998 to 2016. It simply consists of a version with an off-road setting of the Volvo V70.

The XC derivative was combined with all three series of the V70. Like the V70, it has the engine in a transverse position. The second series debuted as the V70XC, which was changed to the XC70 when, at the end of 2002, the large XC90 SUV was introduced.

2003-2016 Volvo XC70 Maintenance Service Light Reset Guide

When the Maintenance Overdue message appears in the display, it’s time for regular service at the workshop. The system must be reset after performed the maintenance service on your vehicle. Depending on your vehicle model, here are a few ways to reset the maintenance  light on Volvo XC70:

2nd Generation (2003-2007)

In the first generation of the Volvo XC70 (2003 2004 2005 2006 2007), you can reset the service light using the Trip button. Here’s how to do it:

• Make sure your vehicle is stopped in a safe place
• Place the ignition to the position I
• Trip mode needs to be on TRIP 1 or T1

• Hold down the TRIP button and then place the ignition to the position II
• Keep holding the TRIP button until the ⚠️ indicator blinks
• Verify the indicator has been reset by shut off the car and then starting the engine

3rd Generation (2008-2016)

There are 2 ways to reset the service light on the third generation of the Volvo XC70 (2008 2009 2010 2011 2012 2013 2014 2015 2016). Both use different methods. Depending on your vehicle model year, here’s how to do it:

With Cluster Button

With Turn Signal Lever

Follow these instructions if your vehicle is equipped with a control button on the turn signal lever.

• Keep the remote key into the ignition slot and then press the START/STOP ENGINE button briefly
• Use the thumbwheel on the turn signal lever to select Trip 2 or T2

• Press and hold the OK button on the end of the lever while holding the START/STOP ENGINE button
• Keep holding the OK button until the ⓘ indicator blinks
• Release both buttons when you hear a chime
• Verify the indicator has been reset by starting the engine

If T2 doesn’t work, please try T1

These instructions are based on the Volvo XC70 owner’s manual. This procedure should apply to the second and third generations of the Volvo XC70 (2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 model years). Hopefully, the article 2003-2016 Volvo XC70 Maintenance Service Light Reset Guide can solve your problem. Good Luck!