How To Reset Toyota Highlander TPMS Tire Pressure Light (2013-2018)

Last Updated on February 17, 2020 by Christ

How To Reset Toyota Highlander TPMS Tire Pressure Light (2013-2018) – All-New 2014 Toyota Highlander claimed as a true SUV. The exterior design of the Toyota Highlander 2014 a completely new car exudes strength. The longer length of the car’s exterior 3-inch, and 1.5-inch width increases from the previous model. The cabin serves a 3-row seat that can put 8 people. Cargo capacity is also increased.

Reportedly, besides featuring a new interior, the cabin of the 2014 Highlander is much quieter thanks to the development of damping. There are three engine options: a 2.7-liter 4-cylinder Dual VVT-i with a 6-speed automatic transmission, the V6 3.5-liter Dual VVT-i and the new transmission 6-speed automatic, and a 3.5-liter V6 hybrid. Toyota also provided him with some new technologies such as Dynamic Torque-Control All-Wheel Drive (AWD), upgraded suspension, electronic power steering is optimized.

How To Reset Toyota Highlander TPMS Tire Pressure Light (2013-2018)

How To Reset Toyota Highlander TPMS Tire Pressure Light (2013-2018)

Time needed: 7 minutes

If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. Follow these steps to reset the Tire Pressure Monitoring Sensor (TPMS) light on your Toyota Highlander:

  1. Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.

    .

  2. Adjust the tire inflation pressure recommended on the tire placard located on the door panel.

    .

  3. Turn the engine switch to the “ON” position

    .

  4. Locate and press the tire SET button until the tire pressure warning light blinks 3 times.

    Each year model may have different button locationstoyota tire light tpms reset button

  5. Wait for a few minutes with the engine switch in the “ON” position

    .

  6. Finally, turn the engine switch to the “ACC” or “LOCK” position.

    .

For more details please check the following video:

This tutorial is based on the Toyota owner’s manual. The procedure above can be applied to all the generations of Toyota Highlander (2013 2014 2015 2016 2017 2018 model years). Hopefully, the article How To Reset Toyota Highlander TPMS Tire Pressure Light (2013-2018) useful for you.

Name
Comment
(Visited 5,717 times, 1 visits today)

6 Comments on “How To Reset Toyota Highlander TPMS Tire Pressure Light (2013-2018)

  1. I don’t think 2013 Highlander has a reset button. I look everywhere & can’t find one. I have the TPMS light on for
    quite a while now. Dealer costs about $300 to do it. Since I have the correct tire pressure on my tires, I leave it as is. I can live with it.

  2. I have looked under the drivers side dash several times and can’t find the tire reset button for a 2013 Toyota Highlander. Is there a possibility it is located someplace else.
    Your help would be appreciated.

  3. The button is there on the 2013 Highlander. I just found it. Above where your foot is for the gas pedal. The button is pointing down. I had to use a flash light and twist around to find it.

  4. I also have a 2013 Highlander. The button is under there near your right knee. It’s way down there. Took me forever to find it. Forget looking for it….just keep feeling around under there and you will hit it.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.