How To Reset Toyota CHR TPMS Tire Pressure Warning Light (2017)
Last Updated on January 17, 2020 by Christ
How To Reset Toyota CHR TPMS Tire Pressure Warning Light (2017) – Toyota C-HR is a crossover SUV produced by the automaker Toyota since 2016, which was presented in Paris in 2014 eponymous salon as a prototype of a design studio, called Toyota C-HR Concept. At the Frankfurt Motor Show 2015, a revised version of the same concept has been presented, while the production version of the put into mass production was presented at the Geneva Motor Show in 2016.
The model is based on the new platform tanga Toyota; the name, which is an acronym, stands for Coupe High Rider. In addition to a 1.2-liter turbo petrol engine with 85 kW (116 hp), the C-HR is equipped with a hybrid version with 1.8-liter thermal gasoline, that joined to a total electric another delivers 90 kW (122 hp). The original schedule provides that the model was sold with Toyota’s Scion brand in North America. Then the leaders of Nissan have decided to deploy the C-HR directly through the Toyota brand worldwide.
Contents
How To Reset Toyota CHR TPMS Tire Pressure Warning Light (2017):
Time needed: 17 minutes
If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. To reset the Tire Pressure Monitoring System (TPMS) light on your 2016 2017 Toyota CHR, follow these steps:
- Stop the vehicle in a safe place and turn the engine switch to the LOCK position.
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Turn the engine switch to the “ON” position
- Select SETTING by using the DISP button on the steering wheel
- Press and hold the DISP button to enter the adjustment mode.
- Press the DISP button briefly until Tire Pressure Warning appears
- Press and hold the DISP button to enter the menu
- Select SET to confirm, and then press and hold the DISP button again
- Wait for a few minutes until initialization is completed.
- Finally, turn the engine switch to the “ACC” or “LOCK” position.
Vehicles With Color Display:
- Stop the vehicle in a safe place and turn the engine switch to the LOCK position.
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Press the Arrow button on the steering wheel to select the SETTING menu
- Select the VEHICLE SETTING and press the Center button
- Select TIRE PRESSURE SETUP
- Press and hold the Center button
- Wait for a few minutes until the tire pressure warning light blinks 3 times.
- Finally, turn the engine switch to the “ACC” or “LOCK” position.
This tutorial is based on the Toyota owner’s manual. The procedure above can be applied to all the generations of Toyota CHR (2016 2017) model years, which is equipped with a Tire Pressure Monitoring System (TPMS). Hopefully the article of How To Reset Toyota CHR TPMS Tire Pressure Warning Light (2017) useful for you.
Toyota CHR with color display:
Select Tire Pressure Setup and press 3 times on the Center button.
Wait for a few minutes until the tire pressure warning light blinks 3 times. -> Then then wait several minutes to get an accurate reading of tire pressure and turn the vehicle off.