How To Reset Cadillac CT6 TPMS Tire Pressure System Light (2016-2020) – The Cadillac CT6 (which stands for Cadillac Touring 6) is a small family car segment F produced by Cadillac, coming to light in the New York International Auto Show in 2015 being the first automobile rear-wheel-drive developed by this brand after Cadillac Fleetwood was discontinued in 1996 and the first model with the new classification conducted by the board of Johan de Nysschen. This car is developed at the General Motors plant in Detroit / Hamtramck.

The CT6 is not considered the successor to the Cadillac XTS which exceeds 51 mm in outer length and 272 mm in the wheelbase. It is also the first car brand to use the Omega platform General Motors. There is no possibility of an 8-cylinder engine, including for the first time a V6 3.0-liter twin-turbo engine with 400 hp and 542 Nm with the implementation of a cylinder deactivation system. Other engines are 3.6-liter V6 and a turbocharged 2.0-liter 4-cylinder engine. Including the possibility of an all-wheel-drive and 8-speed automatic transmission.

How To Reset Cadillac CT6 TPMS Tire Pressure System Light (2016-2020)

If you receive a low-tire-pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your Cadillac CT6, follow these instructions:

• Make sure the vehicle is at a complete stop
• Turn the engine switch off
• Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
• Driving for a few miles (kilometers), calibration will complete after 2 minutes of cumulative driving at 20 mph (32 km/h).

This tutorial is based on the Cadillac owner’s manual. This procedure should be work on the latest generation of Cadillac CT6 (2016 2017 2018 2019 2020 model years). Hopefully, the article How To Reset Cadillac CT6 TPMS Tire Pressure System Light (2016-2020) useful for you. Good Luck!