How To Reset Service Reminder Light on Peugeot Expert (2012-2021)

Last Updated on May 23, 2021 by Christ

How To Reset Service Reminder Light on Peugeot Expert (2012-2021) – The Peugeot Expert is a small car that Sevel Nord has produced since 1995. The first generation was developed by PSA Peugeot Citroën together with Fiat based on the Eurovan (PSA / Fiat). Therefore the essentially identical models Citroën Jumpy and Fiat Scudo were created.

Today’s cars are getting more and more sophisticated. There are many sensors embedded to determine the condition of specific components in the vehicle. However, if the light remains on even though the engine is turned on, a problem or malfunction has inevitably occurred. This could be related to other machines or systems.

How To Reset Service Reminder Light on Peugeot Expert (2012-2021)

Contents

How To Reset Service Reminder Light on Peugeot Expert (2012-2021)

Today I’ll be showing you how to reset your service light on a Peugeot now this will work for Peugeot Expert. It’s very easy to do and I remember to do this because a friend of mine was actually going to pay to get it done but there’s no need. Check this out!

2nd Generation (2012-2016)

Time needed: 3 minutes

In this second generation (2012 2013 2014 2015 2016), you can reset the service interval using the Trip button in the cluster. Follow these step:

  1. Place the ignition to the off position

    Make sure your vehicle is stopped in a safe place

  2. Press and hold the Trip button

    The button is located on the cluster
    service wrench light reset

  3. Turn on the ignition without starting the engine

    The screen will start the countdown

  4. Keep press the Trip button until the countdown is complete

    Release the button when the display shows “=0”

  5. Verify the indicator has been reset by starting the engine

    Done!

3rd Generation (2017-2021)

As easy as the previous generation, in this third generation (2017 2018 2019 2020 2021) you can reset the service light using the ? button.

  • Put a key in the ignition slot
  • Press and hold the ? or CHECK button
service wrench light reset
  • Put the ignition key into position two
  • You’ll see that all the light comes on then the counter will start counting down
  • Keep press the button until the countdown is complete
  • Service reset has already done so you take off your finger, switch off ignition take up the key put it back on again then you can start engine see that the service light is gone off

There you go as easy as that so I hope that helped don’t have to pay again this works all Peugeot’s actually it works with other cars as well but sometimes a combination is different. Thanks for reading this!

(Visited 584 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.