How To Reset Service Light on Vauxhall Combo (2002-2021)

Last Updated on April 5, 2021 by Christ

How To Reset Service Light on Vauxhall Combo (2002-2021) – The Combo is a light commercial vehicle produced by the German company Opel since 1986. In 2018 the fifth series was presented.

General Motors’ custom was also sold under the names of other companies in the group, depending on the marketing market: it was also sold as Vauxhall Combo, Holden Combo, and Chevrolet Combo. The various series also followed the classic Opel name, such as Combo A, Combo B, etc.

How To Reset Service Light on Vauxhall Combo (2002-2021)

Contents

How To Reset Service Light on Vauxhall Combo (2002-2021)

When the system has calculated that oil life has exceeded the specified service interval, a warning message will appear in the display. You need perform an oil change reset the system. Depending on your vehicle model, here are a few ways to reset the service light on Vauxhall Combo:

3rd Generation (2002-2011)

Time needed: 3 minutes

In this third generation Vauxhall Combo (2002 2003 2004 2005 2006 2007 2008 2009 2010 2011), you can reset the service or INSP light using the Trip button on the cluster. Follow these steps:

  1. Place the ignition to the off position

    Make sure your vehicle is stopped in a safe place

  2. Press and hold the TRIP button

    The button is located on the cluster
    service oil change light reset

  3. Turn on the ignition without starting the engine

    If your car equipped with ignition button, press and hold the Start/Stop button for 5 seconds without touch the brake pedal

  4. Keep press the button until the INSP light stop flashing

    Release the button when the new service interval appears on the screen

  5. Verify the indicator has been reset by starting the engine

    Done!

4th Generation (2012-2017)

The fourth generation of the Vauxhall Combo (2012 2013 2014 2015 2016 2017) is based on Fiat Doblò. In this generation, you can reset the service light using the gas and brake pedals.

  • Turn on the ignition without starting the engine
  • Press and hold the Gas pedal fully down
  • Press the brake pedal 7 times within 10 seconds
  • Keep press the the Gas pedal for 60 seconds
  • Next, turn off the ignition and leave for another 60 seconds
  • Finally, verify the indicator has been reset by starting the engine

5th Generation (2018-2021)

The latest generation or fifth generation of this Combo (2018 2019 2020 2021) is based on the Citroën Berlingo. In this generation, you can reset the service light using the CHECK button on the cluster. Here’s how to do it:

  • Place the ignition to the off position
  • Press and hold the CHECK or ? button
service oil change light reset
  • Turn on the ignition without starting the engine
  • Keep press the CHECK or ? button until it counts to 0 and Reinitialisation Done message appears on the screen
  • Finally, verify the indicator has been reset by starting the engine

These instructions are based on the Vauxhall Combo owner’s manual. This procedure should apply to the third, fourth, and fifth generations of the Vauxhall Combo (2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How To Reset Service Light on Vauxhall Combo (2002-2021) can solve your problem. Good Luck!

(Visited 2,492 times, 1 visits today)

1 Comment on “How To Reset Service Light on Vauxhall Combo (2002-2021)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.