How Do I Reset Oil Change Minder Oil Life Light on Ford Ranger (2011-2021)
Last Updated on October 8, 2020 by Christ
How Do I Reset Oil Change Minder Oil Life Light on Ford Ranger (2011-2021) – The Ford Ranger is a compact pickup produced by Ford for the American market since 1983 and of which the fourth series was presented in 1998. The name “Ranger” had previously been used (from 1965 to 1981) for the more luxurious set-ups of the Ford F-Series, a series of full-size pickups.
In 1998 he presented the fourth Ranger series that showed a further increase in both of the steps of lengths available. The fifth and sixth generations were introduced in 2005 and 2012, respectively.
Contents
How Do I Reset Oil Change Minder Oil Life Light on Ford Ranger (2011-2021)
Did you get a Engine Oil Change Due Next Service or Oil Change Required message on your 2011 2012 2019 2020 2021 Ford Ranger? This means you must immediately perform oil change on your vehicle. Don’t forget to reset the oil minder system afterward. Depending on your vehicle model, here are a few ways to reset the oil life light.
3rd Generation (2011-2012)
Time needed: 7 minutes
The third generation of Ford Ranger was marketed from 1998 to 2012, however you can only reset the oil in the 2011 model year and above. Here’s how to reset the engine oil life on the Ford Ranger third generation.
- Turn on the ignition without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START/STOP button once without pressing the brake pedal
- Depress the Brake and Accelerator pedals at the same time
Fully press both pedals for about 25 seconds
- Keep holding both pedals until a message confirming that the reset is complete appears on the screen
This message confirms that the reset procedure was completed correctly.
- Release the pedals and switch off the ignition
Done!
4th Generation (2019-2021)
The fourth generation is today’s latest models, this generation was introduced since 2019 for US market. Here’s how to reset the engine oil life on the Ford Ranger fourth generation.
- Turn the engine switch to the “ON” position
- Find the SETTINGS menu by using the ▲▼ navigation button and press the OK button to select
- Select VEHICLE
- Select OIL LIFE RESET
- Press and holds the OK button until oil life resets to 100%
These instructions are based on the Ford Ranger owner’s manual. This procedure should apply to the third and fourth generation of the Ford Ranger (2011 2012 2019 2020 2021 model years). Hopefully, the article How Do I Reset Oil Change Minder Oil Life Light on Ford Ranger (2011-2021) can solve your problem. Good Luck!
My ford ranger 2.0 bi trubo limited dun have the oil life setting as name above , kindly advise ?