How To Reset Oil Change Light on RAM Promaster (2014-2021)
Last Updated on December 2, 2020 by Christ
How To Reset Oil Change Light on RAM Promaster (2014-2021) – Since 2013 the Ducato has been sold on the NAFTA market under the Ram brand. It differs in some adjustments to the US safety standards and to the reference market systems.
RAM Promaster is equipped, as an alternative to the Fiat diesel engine, with a 3.6-liter, 290 HP Pentastar V6 petrol engine. This car has a unibody construction and front-wheel drive.
How To Reset Oil Change Light on RAM Promaster (2014-2021)
Time needed: 7 minutes
When you exceed the next scheduled oil change interval, the Change Engine Oil light will display in the screen. This indicator system must be reset after performed the maintenance on your vehicle. The easiest way to reset the oil light on the RAM Promaster is by pressing the gas pedal. Here’s how to get started:
- Place the ignition to the RUN position without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal
- Fully depress the GAS pedal, three times within 10 seconds
Don’t rush, make sure you press it fully
- Turn off the ignition
Press the ENGINE START/STOP button once
- Verify the indicator has been reset by starting the engine
Done!
These instructions are based on the RAM Promaster owner’s manual. This procedure should apply to the first generation of the RAM Promaster (2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How To Reset Oil Change Light on RAM Promaster (2014-2021) can solve your problem. Good Luck!
Leave a Reply