Oil Life Reset: Jeep Cherokee Oil Change Required Light (2014-2021)

Last Updated on December 3, 2020 by Christ

Oil Life Reset: Jeep Cherokee Oil Change Required Light (2014-2021) – Jeep Cherokee is built on the Compact U.S. platform. Wide, launched in 2010 by Chrysler and Fiat. Just like the Liberty, it has a monocoque body, but its engines are located transversely, not longitudinally.

The Cherokee is available with two new gasoline engines. A 2.4-liter inline-four from the Tigershark series and a 3.2-liter V-six from the Pentastar series. Both engines transmit power through a new 9-speed automatic transmission.

Oil Life Reset Jeep Cherokee Oil Change Required Light (2014-2021)

Contents

Oil Life Reset: Jeep Cherokee Oil Change Required Light (2014-2021)

When you exceed the next scheduled oil change interval, the Oil Change Required light will display in the screen. This indicator system must be reset after performed the maintenance on your vehicle. Depending on your vehicle model, here are a few ways to reset the oil light on 2014 2015 2016 2017 2018 2019 2020 2021 Jeep Cherokee:

With Gas Pedal

Time needed: 7 minutes

The fastest way to reset the oil light on the Jeep Cherokee is by pressing the gas pedal. Here’s how to get started:

  1. Place the ignition to the RUN position without starting the engine

    If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal

  2. Fully depress the GAS pedal, three times within 10 seconds

    Don’t rush, make sure you press it fully

  3. Turn off the ignition

    Press the ENGINE START/STOP button once

  4. Verify the indicator has been reset by starting the engine

    Done!

With Cluster Display

For the 2016 model year vehicles or above, you can also reset the oil through the instrument cluster by using the EVIC control buttons. Here’s how to do it:

  • Press the ENGINE START/STOP button twice without pressing the brake pedal to make the vehicle in the RUN position without start the engine
  • Go to the VEHICLE INFO by using the ▼navigation button
oil change required light reset
  • Scroll to the OIL LIFE menu by using the ◄ ►navigation button
  • Press and hold the OK button to execute the oil life reset

These instructions are based on the Jeep Cherokee owner’s manual. This procedure should apply to the fifth generation of the Jeep Cherokee (2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Oil Life Reset: Jeep Cherokee Oil Change Required Light (2014-2021) can solve your problem. Good Luck!

(Visited 346 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.