How To Reset Maintenance Minder Oil Change Light on Acura ZDX (2010-2013)
Last Updated on September 21, 2020 by Christ
How To Reset Maintenance Minder Oil Change Light on Acura ZDX (2010-2013) – The Acura ZDX is a car produced by the Japanese car manufacturer Acura since 2009. Production ended in 2013 after 7191 units were built.
The car, based on the platform of the Acura MDX and the Honda Pilot, is equipped with a 3.7-liter V6 engine with 304 hp and 366 Nm, combined with a 6-speed automatic gearbox with selector rockers on the steering wheel. The car is equipped with an Acura patented all-wheel-drive system called Super Handling All-Wheel Drive (SH-AWD).
How To Reset Maintenance Minder Oil Change Light on Acura ZDX (2010-2013)
Time needed: 7 minutes
Did you get a maintenance service warning light every time you turn on the ignition on your 2010 2011 2012 2013 Acura ZDX? This means you must immediately perform maintenance services and oil change on your vehicle. Do not forget to reset the service interval afterward. Here’s how to do it:
- Turn on the ignition without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START STOP button twice without pressing the brake pedal
- Press the SEL/RESET button repeatedly until oil life appears on the display
The button is located on the steering wheel
- Press and hold the SEL/RESET button until reset mode appears on the display
Press the SEL/RESET button for more than 10 seconds
- Select RESET to execute the oil life reset
Done!
This tutorial is based on the Acura ZDX owner’s manual. This procedure should apply to the first generations of Acura ZDX (2010 2011 2012 2013 model years). Hopefully, the article How To Reset Maintenance Minder Oil Change Light on Acura ZDX (2010-2013) can solve your problem. Good Luck!
Leave a Reply