How To Reset Peugeot Partner Tyre Pressure Warning Light (2015-2020)

Last Updated on January 20, 2020 by Christ

How To Reset Peugeot Partner Tyre Pressure Warning Light (2015-2020) – The Partner is an MPV produced by French manufacturer Peugeot since 1996. The name Ranch was used only for the Italian market for the first series. Abroad, this car is sold from the start with the Partner name. In 2008 he debuted the new series of the Ranch which in Italy has changed its name to Partner, conforming to the rest of the world. The design has been completely renovated (like his twin Citroen Berlingo) and the load capacity reaches 3.9 m3 with the long-wheelbase version.

The lines are much more aggressive: some newspapers have called even sporty. The new Partner has a front that features the typical big mouth of Peugeot produced in the 2000s. In accordance with the Peugeot family-feeling of the period are also the large headlights with a pointed design. Even the rear light units are larger than in the previous series. At its debut, the second generation of the MPV Peugeot has been proposed essentially in two engines, although it declined in several versions. On the front, we find the 1.6 DOHC petrol TU5 available with a power of 109 hp and the most modern engine Prince with reduced power to 90 hp.

How To Reset Peugeot Partner Tyre Pressure Warning Light (2015-2020)

Contents

How To Reset Peugeot Partner Tyre Pressure Warning Light (2015-2020):

Time needed: 7 minutes

If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. To reset the Tire Pressure Monitoring System (TPMS) light on your Peugeot Partner, follow these steps:

  1. Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.

  2. Adjust the tire inflation pressure recommended on the tire placard located on the door panel.

  3. Turn the engine switch to the “ON” position

  4. Locate and press the tire pressure warning reset button until an audible signal confirms the reinitialisation.

    Low Tyre Preesure Reset Button

Method 2:

  • Stop the vehicle in a safe place and turn the engine switch off
  • Adjust the tire inflation pressure recommended on the tire placard located on the middle pillar, driver’s side.
  • Turn the engine switch to the “ON” position
  • Press the MENU button located on the audio system
  • Access the  Personalisation Configuration menu
  • Scroll down and select Define vehicle parameters
  • Select the Tyre pressures
  • Then select Reinitialisation and Confirm the instruction by pressing “Yes”

Method 3:

Use this method, if your vehicle is equipped with a Touch screen audio system:

  • Stop the vehicle in a safe place and turn the engine switch off
  • Adjust the tire inflation pressure recommended on the tire placard located on the middle pillar, driver’s side.
  • Turn the engine switch to the “ON” position
  • Press the MENU button located on the audio system
  • Select the “Driving” menu.
  • In the secondary page, select “Under-inflation initialisation”.
  • Confirm the instruction by pressing “Yes”

This tutorial is based on the Peugeot owner’s manual. The procedure above can be applied to all the latest generations of Peugeot Partner (2015 2016 2017 2018 model years), which is equipped with a Tire Pressure Monitoring System (TPMS). Hopefully the article of How To Reset Peugeot Partner Tyre Pressure Warning Light (2015-2020) useful for you.

(Visited 6,587 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.