How To Reset Genesis G80 Wrench Service Light (2017-2019)
Last Updated on January 3, 2021 by Christ
How To Reset Genesis G80 Wrench Service Light (2017-2019) – The Genesis G80 is a passenger car produced by the Korean car manufacturer Genesis Motor starting in 2016. Originally this car created as the second generation of the Hyundai Genesis, it was later rebranded to the G80 after creating the Genesis brand.
The car is a mid to high-end 3-volume sedan, with the classic front / longitudinal engine setup and rear-wheel drive. Early rank models available with 3.3, 3.3 HTRAC and 3.8-litre V6 petrol engines.
How To Reset Genesis G80 Wrench Service Light (2017-2019)
Time needed: 7 minutes
The service light will flash each time you turn on the ignition when your vehicle exceeds the specified service interval. The service interval must be adjusted after performed maintenance on your vehicle. Here is how to reset the service light on 2017 2018 2019 Genesis G80:
- Place the ignition to the ON position without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal
- Go to the ⚙️ USER SETTINGS mode by pressing the ❐ MODE button repeatedly
The button is located on the steering wheel
- Find and select SERVICE INTERVAL
Use the navigation switch to scroll and press OK button to enter the menu
- Make sure you activate the service interval function by giving a check mark
In this menu you can set a maintenance reminder at a specific interval by adjust the Time or Distance
- Use the navigation switch to change the digit value. Press the OK button to confirm the changes.
Done!
These instructions are based on the Genesis G80 owner’s manual. This procedure should apply to the first generation of the Genesis G80 (2017 2018 2019 model years). Hopefully, the article How To Reset Genesis G80 Wrench Service Light (2017-2019) can solve your problem. Good Luck!
Leave a Reply