Reset Guide: 2011-2017 Chrysler 200 Oil Change Required Light

Last Updated on November 21, 2020 by Christ

Reset Guide: 2011-2017 Chrysler 200 Oil Change Required Light – The Chrysler 200 is a car produced by the US car manufacturer Chrysler from 2010 and marketed from 2011 until 2017. There was a European variant of the car: Lancia Flavia, sold only in the cabriolet version.

It is a 4.87-meter-long sedan and, like the model it replaced, is marketed with two body variants: sedan and a convertible. The 200 is based on the same platform as its ancestor, the “JS,” the name Chrysler identifies its version of the Mitsubishi GS platform.

Reset Guide 2011-2017 Chrysler 200 Oil Change Required Light

Contents

Reset Guide: 2011-2017 Chrysler 200 Oil Change Required Light

When you exceed the next scheduled oil change interval, the Oil Change Required light will display in the screen. This indicator system must be reset after performed the maintenance on your vehicle. Depending on your vehicle model, here are a few ways to reset the oil light on 2011 2012 2013 2014 2015 2016 2017 Chrysler 200:

With Gas Pedal

Time needed: 7 minutes

The fastest way to reset the oil light on all Chrysler 200 car models is by pressing the gas pedal. Here’s how to get started:

  1. Place the ignition to the RUN position without starting the engine

    If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal

  2. Fully depress the GAS pedal, three times within 10 seconds

    Don’t rush, make sure you press it fully

  3. Turn off the ignition

    Press the ENGINE START/STOP button once

  4. Verify the indicator has been reset by starting the engine

    Done!

With Cluster Display

For the 2015 model year vehicles or above, you can also reset the oil through the instrument cluster by using the steering control button. Here’s how to do it:

  • Press the ENGINE START/STOP button twice without pressing the brake pedal to make the vehicle in the RUN position without start the engine
  • Go to the VEHICLE INFO by using the ▼navigation button
oil change light reset
  • Scroll to the OIL LIFE menu by using the ◄ ►navigation button
  • Press and hold the OK button to execute the oil life reset

These instructions are based on the Chrysler 200 owner’s manual. This procedure should apply to the first and second generations of the Chrysler 200 (2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Reset Guide: 2011-2017 Chrysler 200 Oil Change Required Light can solve your problem. Good Luck!

(Visited 179 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.