Peugeot 3008: How To Reset Service Light (2011-2021)
Last Updated on May 15, 2021 by Christ
Peugeot 3008: How To Reset Service Light (2011-2021) – The Peugeot 3008 is a mid-range crossover car. The first generation was produced from 2009 to 2016 by the French car manufacturer Peugeot.
The 3008 represents Peugeot’s first true crossover; the 4007 model was already on the list, but it is still classifiable as an authentic SUV. In the middle of the same year, its commercialization became operational in most of the European markets.
Contents
Peugeot 3008: How To Reset Service Light (2011-2021)
If you see the service indicator blinks, it means that you have to perform maintenance service on your car. You also need to reset the service interval so you know when to do the next service. Depending on your vehicle model, here are a few ways to reset the service light on Peugeot 3008:
1st Generation (2011-2015)
Time needed: 3 minutes
In this first generation (2011 2012 2013 2014 2015), you can reset the service interval using the Trip button in the cluster. Follow these step:
- Place the ignition to the off position
Make sure your vehicle is stopped in a safe place
- Press and hold the ? /000 button
The button is located on the cluster
- Turn on the ignition without starting the engine
The screen will start the countdown
- Keep press the ? /000 button until the countdown is complete
Release the button when the display shows “=0”
- Verify the indicator has been reset by starting the engine
Done!
2nd Generation
There are 2 ways to reset the service light on this generation. Depending on your vehicle model year, here’s how to do it:
2016-2019 Model Years
- Place the ignition to the off position
- Press and hold the ? 000 button
- Turn on the ignition without starting the engine
- The screen will start the countdown
- Keep press the ? 000 button until the countdown is complete
- Verify the indicator has been reset by starting the engine
2020-2021 Model Years
Unlike previous generations, in this generation (2020 2021) you can reset the service interval using the buttons in the lighting control lever:
- Place the ignition to the off position
- Press and hold the reset button located on the end of the lighting control lever
- Turn on the ignition without starting the engine
- The screen will start the countdown
- Keep press the reset button until the countdown is complete
- Verify the indicator has been reset by starting the engine
These instructions are based on the Peugeot 3008 owner’s manual. This procedure should apply to the first and second generations of the Peugeot 3008 (2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Peugeot 3008: How To Reset Service Light (2011-2021) can solve your problem. Good Luck!
Leave a Reply