2007-2020 Nissan X-Trail: How To Reset Maintenance Service Oil Light
Last Updated on November 11, 2020 by Christ
2007-2020 Nissan X-Trail: How To Reset Maintenance Service Oil Light – The Nissan X-Trail is an SUV car produced by the Japanese car manufacturer Nissan Motor. This car has been on the market since 2001. The Nissan X-Trail is produced and marketed in 2001 with the version called T30.
The second version, called T31, was presented at the 2007 Geneva Motor Show. The X-Trail is equipped with NISSAN’s intelligent “all mode 4x4i” drive system and the climb back and hill assist system.
Contents
2007-2020 Nissan X-Trail: How To Reset Maintenance Service Oil Light
When the engine oil exceed the specified service interval, the maintenance reminder light will appear on the display. You should perform an oil change and reset the system. Depending on your vehicle model, here are a few ways to reset the oil light on 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Nissan X-Trail.
2nd Generation (T31)
The first generation of Nissan X-Trail was marketed from 2007 to 2013. There are two ways to reset the oil life in this generation. Depending on your vehicle model year, here are how to reset the service light on the Nissan X-Trail:
2007-2009 Model Years
Time needed: 7 minutes
Follow the instructions below for the 2007 2008 2009 model years:
- Turn on the ignition without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START STOP button two times without depressing the brake pedal
- As soon as the symbol appears, press and hold the TRIP button until light blinks
The button is located on the instrument cluster
- Press the TRIP button briefly to increase the interval distance
Each press increases the interval distance by 1,000 km (500 miles)
- Wait until light stop blinks
The display will returns to the previous mode and the new interval is set
- Turn off the ignition and then start the engine to verify the maintenance minder light has been reset
Done!
2010-2013 Model Years
- Turn on the ignition without starting the engine
- Go to SETTINGS mode by pressing the ❏ knob repeatedly
- In the setting mode screen rotate the ❏ knob to move to MAINTENANCE menu
- Press the knob to select the menu
- Select SERVICE
- You can set an service reminder at a specific interval or select RESET on this menu
3rd Generation (T32)
The second generation is today’s latest models, this generation was introduced since 2014. Depending on your vehicle model year, here are how to reset the maintenance engine oil light on the Nissan X-Trail:
2014-2016 Model Years
- Turn on the ignition without starting the engine
- Go to the ⚙️ SETTINGS menu by using the ▲▼ navigation button
- Press the ENTER button to select the menu
- Scroll down and select MAINTENANCE
- Select SERVICE or OIL
- You can set an engine oil reminder at a specific interval or select RESET on this menu
- When a confirmation message appears, select YES to execute the oil reset
2017-2020 Model Years
- Press the ENGINE START STOP button once without depressing the brake pedal
- Go to the SETTINGS menu by using the ◄ ► navigation button
- Scroll down to the MAINTENANCE by using the ▲▼ navigation button and press OK button to enter
- Select OIL AND FILTER
- You can set an engine oil reminder at a specific interval or select RESET on this menu
- When a confirmation message appears, select YES to execute the oil reset
Repeat this guide to reset Tire and Other Maintenance if needed.
This tutorial is based on the Nissan X-Trail owner’s manual. This procedure should apply to the second and third generations of Nissan X-Trail (2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully, the article 2007-2020 Nissan X-Trail: How To Reset Maintenance Service Oil Light can solve your problem. Good Luck!
Leave a Reply