Mercury Montego Inertia Switch Fuel Pump Reset Location
Last Updated on February 9, 2020 by Christ
Mercury Montego Inertia Switch Fuel Pump Reset Location – The Montego is a car produced by Mercury from 1968 to 1976 and from 2005 to 2007. From 1968 to 1976 it belonged to the mid-size cars category. In 1976 he came out of production temporarily because his place was taken by a version of the Cougar, which in fact expanded the line.
From 2005 to 2007 the name Montego was instead associated with a full-size car. This third series of Montego was essentially the twin of the Ford Five Hundred and was the first full-size model of the Mercury since 1992. In 2008 the model changed its name to Sable and was finally removed from the lists.
Mercury Montego Inertia Switch Fuel Pump Reset Location
Time needed: 7 minutes
The fuel pump shut-off (inertia) switch is a device that stops the fuel pump of the fuel delivery to the engine. If your engine cranks but does not start, this switch may have been activated. Here’s how to find and reset the switch:
- On the Mercury Montego, the fuel pump shut-off switch is located in the front passenger footwell area in the right upper corner.
May you need to remove the lower scuff plate to access the switch.
- Make sure to turn off your vehicle
- Pushing in the Fuel pump shut-off (inertia) switch
- Turn the ignition to the ON position (Do not turn the ignition to ‘START) and wait a few seconds and return the key to off position.
Warning! Do not reset the fuel system shut-off switch if you see or smell fuel from the fuel system.
This tutorial is based on the Mercury owner’s manual. This procedure works on a 2005 2006 2007 Mercury Montego that uses the Petrol engine. Hopefully, the article of Mercury Montego Inertia Switch Fuel Pump Reset Location useful for you.
Leave a Reply