How To Reset Honda Accord TPMS Tire Pressure Sensor Light 2018-2020

How To Reset Honda Accord TPMS Tire Pressure Sensor Light 2018-2020 – Tenth generation Accord in Detroit was published on July 14, 2017, September 18 mass production in the US market, to the year 2018 cars on sale October 27 October 18 in the Canadian market. The team is scheduled to start selling in the first quarter of 2018.

The tenth-generation Accord is based on the same Honda-generation SBC platform as the tenth-generation Civic and the fifth-generation CR-V. Compared with the ninth generation, the tenth generation wheelbase grew by about 50 mm, but the length of the car was shortened by about 10 mm, and the width of the car was slightly widened by about 1 mm.

How To Reset Honda Accord TPMS Tire Pressure Sensor Light 2018-2020

How To Reset Honda Accord TPMS Tire Pressure Sensor Light 2018-2020:

Time needed: 7 minutes.

If you replaced a wheel, tire, TPMS sensor etc. and are now getting a warning light on your car, then the sensor needs to be reset. To turning off the Tire Pressure Monitoring System (TPMS) sensor light on your 2018 2019 2020 Honda Accord, follow these steps:

  1. Make sure the vehicle is at a complete stop, the shift lever is in N (for manual transmission) or the shift lever is in P (for Automatic transmission/CVT models)

  2. Turn the engine switch off

  3. Adjust the tire inflation pressure recommended on the tire placard located on the door panel.

  4. Turn the ignition to the ON position without starting the engine.

  5. Press the MENU/CLOCK button (located on the Audio Display) to enter the Vehicle Menu screen.

  6. Select SETTINGS by using a rotary navigation button

  7. Select VEHICLE SETTINGS

  8. Select TPMS Calibration

  9. Select CALIBRATE

  10. Calibration will complete after 30 minutes of cumulative driving at 30 to 60 mph.

Models with Color Audio display:

  • Make sure the vehicle is at a complete stop, the shift lever is in N (for manual transmission) or the shift lever is in P (for Automatic transmission/CVT models)
  • Turn the engine switch off
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Turn the ignition to the ON position without starting the engine.
  • Press the HOME button (located on the Audio Display) to enter the Vehicle Menu screen.
  • Select SETTINGS
  • Select VEHICLE
  • Select TPMS Calibration
  • Select CALIBRATE
  • Calibration will complete after 30 minutes of cumulative driving at 30 to 60 mph.

For more details please check the following video:

Note: Calibration will complete after 30 minutes of cumulative driving at 30 to 60 mph.

This tutorial is based on the Honda owner’s manual. The procedure above can be applied to the latest generations of the Honda Accord (2018 2019 2020 model years). Hopefully, the article of How To Reset Honda Accord TPMS Tire Pressure Sensor Light 2018-2020 useful for you.

Tagged with: , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.