Mercury Mariner Inertia Switch Fuel Pump Cut-Off Reset Location
Last Updated on February 9, 2020 by Christ
Mercury Mariner Inertia Switch Fuel Pump Cut-Off Reset Location – Introduced in the 2005 model year when the Ford Escape was upgraded, the Mariner positioned itself, in the compact SUV crossover category, above the aforementioned model and the Mazda Tribute. The Mariner, compared to the mentioned models, showed the differences.
Unlike counterparts models, the Mariner was not available for manual transmission. The Mariner was the first Mercury model to have mounted a four-cylinder engine in line after the end of production of the seventh series of the Mercury Cougar, which was removed from the price lists in 2002. In 2006 it was launched the hybrid version of the Mariner.
Mercury Mariner Inertia Switch Fuel Pump Cut-Off Reset Location
Time needed: 7 minutes
The fuel pump shut-off (inertia) switch is a device that stops the fuel pump of the fuel delivery to the engine. If your engine cranks but does not start, this switch may have been activated. Here’s how to find and reset the switch:
- On the Mercury Mariner, the fuel pump shut-off switch is located in the front passenger’s footwell, behind a flip-up cover, by the kick panel access cover. May you need to remove the lower scuff plate to access the switch.
- Make sure to turn off your vehicle
- Pushing in the Fuel pump shut-off (inertia) switch
- Turn the ignition to the ON position (Do not turn the ignition to ‘START) and wait a few seconds and return the key to off position.
Warning! Do not reset the fuel system shut-off switch if you see or smell fuel from the fuel system.
This tutorial is based on the Mercury owner’s manual. This procedure works in 2004 2005 2006 2007 2008 2009 2010 2011 Mercury Mariner that uses the Petrol engine. Hopefully, the article of Mercury Mariner Inertia Switch Fuel Pump Cut-Off Reset Location useful for you.
Leave a Reply