How To Reset Nissan Rogue SRS Airbag Warning Light (2008-2020)
Last Updated on February 17, 2020 by Christ
How To Reset Nissan Rogue SRS Airbag Warning Light (2008-2020) – Nissan Rogue crossover car appears as a stylish, economical and functional and fairly affordable price. Overall, the car is worth to buy because it has all that is needed by the owner of the car. Nissan Rogue as a general class of small crossovers so easy to drive. But not only that, Rogue appears more stylish with the shape of the front grille is made as embedding a tie with the Nissan logo in the middle.
This car has the dimensions of length: 182.3 inches, width 72.4 inches, height: 67.5 inches. The front of the Nissan Rogue is equipped with LED lights and full LED headlamps for the upper-class version. While on the wheels using the standard model 17-inch alloy wheels and high-end version of the SL uses 18-inch wheels are combined with Dunlop tires P225 / 65R18 all-season tires Grandtrek.
How To Reset Nissan Rogue SRS Airbag Warning Light (2008-2020)
Time needed: 7 minutes
If you receive an SRS Airbag warning light while driving and you want to clear or turning off the warning light on your Nissan Rogue, follow these instructions:
- Turn the ignition key to position “ON” without starting the engine,
If your vehicle has a Smart key button, press the “Start” button twice without touching the brake pedal.
- Watch the airbag light closely.
It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the key off instantly.
- Wait for more than 3 seconds
.
- Repeat steps 1-3 two more times until you have done the cycle three times.
.
- Now turn the key on and watch the light. It will start blinking in a different, slower manner.
This is a diagnostic mode. You can watch this for a little while, no hurry.
- Now turn the key off again, wait for more than 3 seconds like in step 3 again, and turn back on.
.
- Turn the ignition off and then start the engine to verify the indicator has been reset
.
For more details, please watch the following video:
If the procedure worked, the airbag light will not be flashing. This tutorial is based on the Nissan repair manual. This procedure should apply to all models of Nissan Rogue (2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully, the article How to Reset Nissan Rogue SRS Airbag Warning Light (2008-2020) useful for you. Good Luck!
Thank you for sharing this procedure. The flashing light stopped, for how long, who knows?
I just tried to do this on a keyless 2015 Rogue, and pressing the start button without touching the brake pedal does not work. We removed the passenger seat to do some cleaning, and now the airbag light is on solid. I have been trying to contact my local dealer, but I am not having a lot of luck.
Hey Ron, I did the same thing to my vehicle and now im stuck with a solid red airbag light on… Did you figure out how to make your light go off?
Thanks!
Awesome. It actually worked. Thanks! Nissan service was going to charge $135 just to look into it. What a bunch of rip off people!!
Reset airbag light, now it flashes one long five short. What dose this mean,?
I did it the way the instructions are posted,and it work real fine,Thanks a lot.Carlos
I tried it and it worked until I started to drive in and it came back on. Do I need to try something else to keep it off?
Hey there. I have same problem with Rogue 2013. Light will go off after reset but comes back on as soon i start driving. Do you know why is this happening?
Wow. Thank you so much we followed your video and it worked like you said! Our lease is almost up and don’t want to pay anything extra if we don’t have to.
Thanks so much!
Worked for me. But I had to try a few times until the light would actually turn off instead of go from steady on and immediately blinking. After like 5 tries it did go off. Thank you!!!
Mine will be good for a day and then come back.
It started when I replaced the cabin air filter.
I don’t even see any airbag wiring near there. Anybody got any ideas?
My airbag light stays on constantly. I tried this and then light is still on.. did not work. What else can do?