How To Reset Nissan Pathfinder Liftgate Trunk Back Door

Last Updated on December 17, 2019 by Christ

How To Reset Nissan Pathfinder Liftgate Trunk Back Door – Nissan Pathfinder Concept appeared at the Detroit Motor Show 2012. The 2013 Nissan Pathfinder has been marketed from autumn 2012 in the United States. 2013 Pathfinder comes with a face and a style that is completely new. Pathfinder is an SUV that was firstborn over 25 years ago. Currently, Nissan Pathfinder is equipped with a 5.6-liter V8 engine and 4.0-liter V6. Pathfinder is ready to secure 7 passengers. Besides spacious cargo room is secured. Pathfinder still equipped 4 × 4 system.

Pathfinder 2013 experienced much radical revision. This SUV carrying a thorough revamping, from the exterior, interior, technology, new platform unibody (monocoque), and more advanced drivetrain. The weight of the car is much lighter than the previous model. Fuel consumption 30% more efficient. FWD and 4WD models offer the best fuel efficiency in its class. Fuel consumption up to 11 ppl on the freeway (highway). Nissan North America equip Pathfinder 2013 with Around View Monitor and EZ Flex Seating System with LATCH AND GLIDE. Coupled with Easy Fill Tire Alert. Heated steering wheel, front seat heating and cooling enriched, and others.

How To Reset Nissan Pathfinder Liftgate Trunk Back Door:

Time needed: 3 minutes

If you have an issue with the Liftgate / Trunk Door and want to reset it, you can be set to open to a specific height by performing the following:

  1. Open the liftgate using the switch or the Intelligent Key.

  2. Pull the liftgate down to the desired position and hold the liftgate (the liftgate will have some resistance when being manually adjusted).

  3. While holding the liftgate in position, press and hold the liftgate switch located on the liftgate until 3 beeps are heard.

  4. The liftgate will open to the selected position setting.

For more details, please watch the following video:

Repeat steps 1-3 for setting the position of the liftgate if you want to change the position of the liftgate. This tutorial is based on the Nissan owner’s manual. The procedure above can be applied to the latest generations of the Nissan Pathfinder (2012 2013 2014 2015 2016 2017 2018 2019 2020) model which is equipped with a power liftgate. Hopefully the article of How To Reset Nissan Pathfinder Liftgate Trunk Back Door useful for you.

(Visited 9,854 times, 1 visits today)

2 Comments on “How To Reset Nissan Pathfinder Liftgate Trunk Back Door

  1. I tried to reset my life gate and for starters it only beeps twice and my problems still exist s. My gate opens all by itself when I am in park or when I first start the car. If I lock it immediacy it doesn’t happened. I turned the power off so it won’t open by itself but I still hear it trying. I’m baffled

  2. I have a 2010 Nissan Pathfinder with a liftgate that just stop working. I checked the fuse 15 amp and all good. The rear window opens ok, but the lift gate actuator isn’t even making any noise so I don’t think anything is jammed up.
    My 6 very basic questions are as follows:
    1> why did the lift gate actuator just stop working out of the blew? any ideas are helpful.
    2> Is there a rely that needs to be checked? I kind of doubt it though.
    3> Is there a liftgate module that may need replacing? Where is it located?
    4> Can I check for voltage at the lift gate actuator to see if the actuator is bad?
    5> Can I just touch the 2 wires on the liftgate switch to test if the switch is bad?
    6> HOW CAN I OPEN THE LIFT GATE MANUALLY?? Help! I cannot see anything on a 2010 pathfinder that shows a by-pass manual liftgate latch axillary system.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.