How To Reset Ford Puma TPMS Low Tyre Pressure Warning Light (2020)

Time needed: 7 minutes

If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. Follow these steps to relearn or reset the Tire Pressure Monitoring System (TPMS) sensor on your Ford Puma:

1. Make sure the vehicle is at a complete stop

   Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.

2. Adjust the tire inflation pressure recommended on the tire placard located on the door panel.

   The tire placard is located on the door panel.

3. Turn the engine switch to the “ON” position

   If your vehicle has the keyless starting system, press the ENGINE START STOP button without pressing the brake pedal

4. Press the MENU button to enter the main menu

   The button is located on the steering wheel
   
5. For a vehicle with 12.3 INCH DISPLAY

   Go to SETTING menu
   Select TIRE MONITOR

6. For a vehicle with 4.2 INCH DISPLAY

   Go to SETTING menu
   Select the INFORMATION menu
   Select the TIRE MONITOR menu

7. When a confirmation message appears on display, press and holds the OK button

   Done!