How To Reset Volvo V90 TPMS Tire Pressure Sensor Light (2017-2020)
How To Reset Volvo V90 TPMS Tire Pressure Sensor Light (2017-2020) – The Volvo V90 is a break from the Swedish car manufacturer Volvo launched in 1996. This was an evolution of the Volvo 960, the latest propulsion of the Swedish manufacturer. In 1998, it was replaced by the V70, replaced in 2016 by a second-generation V90. The second generation of the S90 sedan-based V90 wagon will be unveiled in 2016 and will inaugurate the new Volvo style with “T” front lighting.
His first official photos leaked on the Web on February 12, 2016, and the V90 will be unveiled at the 2016 Geneva Motor Show. In June 2016, camouflaged prototypes of the future version of the V90 that will replace the XC70, the V90 Cross Country, were discovered on the road.
How To Reset Volvo V90 TPMS Tire Pressure Sensor Light (2017-2020):
Time needed: 7 minutes.
If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. To calibrate the Tire Pressure Monitoring System (TPMS) light on your Volvo V90, follow these steps:
- Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Start the engine
- Tap the CAR STATUS APP button in the center display’s App view.
- Tap TPMS
- Tap the CALIBRATE or STORE PRESSURE
- Tap OK to confirm
- Wait for a few minutes until initialization is completed.
- Driving for a few miles (kilometers), calibration will complete after 1 minute of cumulative driving at least 25 km/h (40 mph), and then verify that it turns off.
This tutorial is based on the VOLVO owner’s manual. The procedure above can be applied to the latest generations of Volvo V90 (2017 2018 2019 2020 model years), which is equipped with a Tire Pressure Monitoring System (TPMS). Hopefully, the article of How To Reset Volvo V90 TPMS Tire Pressure Sensor Light (2017-2020) useful for you.