How Do I Reset Chevy Silverado TPMS Tire Pressure Sensor Light (2020)

How Do I Reset Chevy Silverado TPMS Tire Pressure Sensor Light (2020) – The Silverado debuted in 1998 in some countries, although Mexico and was the model 1995, 1996 and 1997; for the 1999 model year, replacing the venerable C / K series trucks. Adhering to Chevrolet-style pedigree sports cars on some models, the Silverado comes with a Sport “SS” Super package with special trim and engine options in the US. UU, and in Mexico, there is 400SS and Boss Truck 60 anniversary.

Today the new Chevrolet Silverado 2019 is being launched, a truck designed to carry out all the tasks of the day, regardless of the hard work. Chevrolet has created a more efficient and technological track of the world’s trucks for work. Safety is an issue that is not overlooked, airbags are standard, ABS brakes, collapsible bodies and other comfort details.

How Do I Reset Chevy Silverado TPMS Tire Pressure Sensor Light (2020)

How Do I Reset Chevy Silverado TPMS Tire Pressure Sensor Light (2020):

If you receive a low-tire-pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your 2019 2020 Chevy Silverado, follow these instructions:

  • Make sure the vehicle is at a complete stop
  • Turn the engine switch off
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Driving for a few miles (kilometres), calibration will complete after 2 minutes of cumulative driving at 20 mph (32 km/h).

Time needed: 17 minutes.

If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. To relearn or reset the Tire Pressure Monitoring System (TPMS) sensor on your Chevy you must have a TPMS relearn tool and follow these steps:

  1. Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.

  2. Place the vehicle in Service Mode by pressing and holding ENGINE START/STOP for more than five seconds without depressing the brake pedal.

  3. If your vehicle has a base level DIC:

    Turn the TRIP ODOMETER button (located on the cluster) briefly until Tire Pressure menu is displayed
    Press and hold the TRIP ODOMETER button to begin the sensor matching process.
    Press the TRIP ODOMETER button to confirm
    The horn sounds twice to signal the receiver is in relearn modechevy tpms reset button

  4. If the vehicle has an uplevel DIC:

    Use the DIC controls on the right side of the steering wheel to scroll to the Tire Pressure Menu
    Press and hold the thumbwheel to begin the sensor matching process.
    Press the thumbwheel button again to confirm
    The horn sounds twice to signal the receiver is in relearn mode

  5. Starting from the driver’s side front tire, place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor.

  6. Repeat the procedure on the right-front tire, the right rear tire, and the last one left rear tire.

  7. A horn chirp confirms that the sensor identification code has been matched to this tire and wheel position.

  8. Turn the ignition off and start the engine to verify the indicator has been reset.

  9. Adjust the tire inflation pressure recommended on the tire placard located on the door panel.

For more details, please watch the following video:

This tutorial is based on the Chevrolet owner’s manual. This procedure should be work on the latest generation of Chevy Silverado 1500 2500 3500 (2019 2020 model years). Hopefully, the article of How Does I Reset Chevy Silverado TPMS Tire Pressure Sensor Light (2020) useful for you.

(Visited 11 times, 1 visits today)
Tagged with: , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.