Home cadillac xt5 2016-2020 Cadillac XT5 TPMS Light Tire Pressure Sensor System Reset
Categories: Tips

2016-2020 Cadillac XT5 TPMS Light Tire Pressure Sensor System Reset

2016-2020 Cadillac XT5 TPMS Light Tire Pressure Sensor System Reset – Cadillac XT5 is car crossover produced by an American automaker General Motors Cadillac brand since the end of 2015. The vehicle was first presented at the Motor Show in Dubai in November 2015. The first copies of the vehicle appear on the market in mid-2016 years as the model year 2017. The car was built as a successor to the SRX is based on the floorboard of code GM C1XX.

In contrast to its predecessor, the vehicle received a brand new grill, refreshed brand logo, redesigned bumper and headlamps equipped with daytime running lights made with LED technology model CT6. The basic unit of the driving of the vehicle is a gasoline engine V6 with a capacity of 3.6 l maximum power of 310 hp equipped with the system start & stop system and cylinder deactivation, which separates the two cylinders during the quiet ride and the 8-speed automatic transmission function Electronic Precision Shift. The drive is transmitted to the front or both axles. Versions for the Chinese market will be equipped with a four-cylinder turbocharged engine with a capacity of 2 liters.

Contents

2016-2020 Cadillac XT5 TPMS Light Tire Pressure Sensor System Reset

If you receive a low-tire-pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your Cadillac XT5, follow these instructions:

  • Make sure the vehicle is at a complete stop
  • Turn the engine switch off
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Driving for a few miles (kilometers), calibration will complete after 2 minutes of cumulative driving at 20 mph (32 km/h).

Time Needed : 7 minutes

If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. To relearn turning off or reset the Tire Pressure Monitoring System (TPMS) light on your Cadillac XT5, follow these steps:

  1. Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.

  2. Place the vehicle in Service Mode by pressing and holding ENGINE START/STOP for more than five seconds

  3. Press the SEL button to enter the Settings page

  4. Scroll down to INFO menu and press SEL button to select it

  5. Scroll to the TIRE PRESSURE screen

  6. Press and hold the SEL button until horn sounds

  7. Starting from the driver’s side front tire, place the TPMS RELEARN TOOL against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor until hearing the confirming horn chirp.

  8. Repeat the procedure on the right-front tire, the right rear tire, and the last one left rear tire.

  9. After hearing the confirming horn chirp for the left rear tire, turn the ignition to the OFF position. Adjust all tires to pressure listed on the tire placard.

Tools
  • TPMS RELEARN TOOL
Materials
  • Cadillac XT5

This tutorial is based on the Cadillac owner’s manual. This procedure should be work on the latest generation of Cadillac XT5 (2016 2017 2018 2019 2020 model years). Hopefully, the article of 2016-2020 Cadillac XT5 TPMS Light Tire Pressure Sensor System Reset useful for you. Good Luck!

Name
Comment
= 1 ? 'str-ic' : 'df-clr' " class="df-clr" on="tap:AMP.setState({ saswp_review_rating: 1 })" role="button" tabindex="1">= 2 ? 'str-ic' : 'df-clr' " class="df-clr" on="tap:AMP.setState({ saswp_review_rating: 2 })" role="button" tabindex="2">= 3 ? 'str-ic' : 'df-clr' " class="df-clr" on="tap:AMP.setState({ saswp_review_rating: 3 })" role="button" tabindex="3">= 4 ? 'str-ic' : 'df-clr' " class="df-clr" on="tap:AMP.setState({ saswp_review_rating: 4 })" role="button" tabindex="4">= 5 ? 'str-ic' : 'df-clr' " class="df-clr" on="tap:AMP.setState({ saswp_review_rating: 5 })" role="button" tabindex="5">
Christ

View Comments

  • I have an2017 deluxe model and I change the wheels with 20 inches with brand new Gm tpms sensors.

    I Follow the above steps and to active the tire pressure screen I need to have the engine running since I have no screen once the car ignition is off.

    Event with the ignition is on ( engine running) I am not able to re set re active all four tpms sensors

    Please advise?

    Please advise if or not I need to have the ignition on ?

Leave a Comment
Published by
Christ
Tags: cadillac xt5Cadillac XT5 Tire PressureCadillac XT5 Tire Pressure TPMS SensorCadillac XT5 Tire ResetCadillac XT5 TPMS LightCadillac XT5 TPMS ResetHow to Reset TPMSreset tpms sensor on xt5Tire Pressure Sensor System
5 years ago

Recent Posts

Exploring the Tech-Advanced Safety Features of Honda Civic

When it comes to safety on the roads, nothing beats the sterling integration of technology…

1 year ago

Mastering Car Oil Changes: Crucial for Business Efficiency

Imagine a car engine as the heart of a business. Without proper and regular maintenance,…

1 year ago

Avoiding Common Car Maintenance Mistakes

Maintaining the health of your car is much like maintaining your health. Ignoring minor symptoms…

1 year ago

Petrol vs Diesel: Unravelling the Used Jeep Wrangler Conundrum

The quest to find the perfect engine variant, when in the market for a used…

1 year ago

Mastering DIY Checks for a Used Jeep Wrangler

When it comes to advancing your automotive acumen, understanding the ins and outs of purchasing…

1 year ago

Key Maintenance Tips for Used Jeep Wranglers

Jeep Wranglers, known for their robust character and off-road prowess, can prove to be resilient…

1 year ago

This website uses cookies.