2016-2020 Citroën Spacetourer Low Tyre Pressure Warning Light Reset

Last Updated on July 4, 2020 by Christ

2016-2020 Citroën Spacetourer Low Tyre Pressure Warning Light Reset – The first version of the third-generation collection was unveiled at the Citroën Spacetourer Geneva Motor Show in spring 2016. The name of the Expert minivan is Peugeot Traveler. Production of the jump began in the spring of 2016.

Production of the Fiat Scudo ceased but was replaced by the Fiat Talento, a sister model to the Opel Vivaro, Renault Trafic and Nissan NV300. This is the result of Opel’s transfer from General Motors to the PSA Group, which also ended the manufacturer’s cooperation project with Renault for the development of vans. Citroën Spacetourer received a full five stars in the 2015 Euro NCAP crash test.

2016-2020 Citroën Spacetourer Low Tyre Pressure Warning Light Reset

Contents

2016-2020 Citroën Spacetourer Low Tyre Pressure Warning Light Reset

Time needed: 7 minutes

If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. Follow these steps to reset the Low Tyre Pressure Warning Light on your Citroën Spacetourer:

  1. Turn off the ignition

    Stop the vehicle in a safe place

  2. Adjust the tire inflation pressure recommended on the tire placard

    The tire placard is located on the middle pillar, driver’s side.

  3. Turn the ignition switch to the “ON” position without starting the engine

    If your car equipped with ignition button, press the Start/Stop button without press the brake pedal

  4. Press the DRIVING button to open the main menu

    The button is located on the audio system
    low tyre pressure reset

  5. Select DRIVING FUNCTIONS tab

    Tap the touchscreen to select

  6. Select UNDER-INFLATION INITIALISATION

    Tap the touchscreen to select

  7. When a message appears on the display, select YES to confirm

    Done!

Method 2:

Use this method, if your vehicle is not equipped with a Touch screen display

  • Stop the vehicle in a safe place and turn the engine switch off
  • Adjust the tire inflation pressure recommended on the tire placard located on the middle pillar, driver’s side.
  • Turn the engine switch to the “ON” position
  • Press the MENU button on the audio system
  • Access the “Personalisation configuration” menu
  • Scroll down and select Vehicle Setting
  • Select the UNDER-INFLATION INITIALISATION
  • When a confirmation message appears, select YES to confirm

Method 3:

  • Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Turn the engine switch to the “ON” position
  • Locate and press the SET button until an audible signal confirms the initialization
  • The button is located on the centre console
citroen low tyre reset button

This tutorial is based on the Citroën owner’s manual. This procedure should apply to the first generation of Citroën Spacetourer (2016 2017 2018 2019 2020 model years). Hopefully, the article 2016-2020 Citroën Spacetourer Low Tyre Pressure Warning Light Reset can solve your problem. Good Luck!

(Visited 536 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.