2015 Opel Vauxhall Meriva Low Tyre Pressure System Reset – The Meriva is a mid-range MPV, produced in the most serious since 2003 by the German automaker Opel. This is a car built by the Opel leadership to complete the Opel monocab range positioning itself between the small Agila and Zafira. In the design phase, Opel engineers have received precise directives relating to the passenger and the build quality flexibility, as high as possible, so as to also create discomfort for cars of much higher lineage, for example as the Mercedes-Benz A class. The Meriva has been unveiled for the first time in May 2002, but the official presentation would take place at the Geneva Motor Show the following year and sales have started in that same spring, with the start of production of the first series. The production had been established in Brazil and in Zaragoza, Spain.
The first series of the Meriva, also called Meriva was precisely that the marketing of which began in April of 2003: the car was characterized by a very rounded body, almost “to egg”, designed to ensure excellent habitability requirements, but also to obtain a good Cx, which in this case was 0.32. The Front resumed the stylistic reasons for Opel at the time, in particular the Corsa C (with which the Meriva shared the basic mechanics) and Vectra C. The round was characterized by tail lights in a vertical development places the very top, at the sides of the rear window. The large tailgate had a joke rather low, so as to facilitate the loads of bulky objects and / or heavy.
2015 Opel Vauxhall Meriva Low Tyre Pressure System Reset:
If you receive a low-tire pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your 2015 2016 2017 Opel Vauxhall Meriva, follow these instructions:
- Make sure the vehicle is at a complete stop
- Turn the engine switch off
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Driving for a few miles (kilometers) to update the tyre pressure values
If you replaced a wheel, tire, TPMS sensor etc. and are now getting a warning light on your car, then the sensor need to be reset. For that you need to purchase the correct TPMS reset tool and follow these instructions:
- Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.
- Turn the ignition to position On without starting the engine.
- Keep brake pedal depressed. Move and hold the selector lever for five seconds to position N until P is displayed in the DIC display
- Set the selector lever to Neutral, for vehicles with manual transmission
- Select the Vehicle Information Menu by use the MENU button on the turn signal lever
- Scroll down and select Tyre Pressure menu
- Press SET/CLR button to reset TPMS
- Press SET/CLR button again to confirm the selection. If the reset mode has been entered successfully, the horn will sound once.
- Starting from the driver’s side front tire, place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor.
- Repeat the procedure on the right-front tire, the right rear tire, and the last one left rear tire.
- A horn chirp confirms that the sensor identification code has been matched to this tire and wheel position.
- After hearing the confirming horn chirp for the left rear tire, training is completed and and a message is shown in the information display.
- Turn ignition to OFF position and then Adjust all tires to pressure listed on tire placard.
For more details, please watch the following video:
This procedure should be work on latest generation of Opel Vauxhall Meriva (2015 2016 2017) model years. Hopefully the article of 2015 Opel Vauxhall Meriva Low Tyre Pressure System Reset usefull for you. Good Luck!