Tips

2013-2014 GMC Yukon Tire Pressure Sensor TPMS Light Reset

2013-2014 GMC Yukon Tire Pressure Sensor TPMS Light Reset – In January 2006, at the Los Angeles Motor Show, GM announced the release of twelve cars a year on the new GMT900 platform. The first of this series was shown Chevrolet Tahoe and GMC Yukon third generation. Their production began in March, and in April new cars of the 2007 model year went on sale.

The car was equipped with eight-cylinder V-shaped engines GM Vortec fourth generation with a displacement of 4.8 litres and 290 hp. (LY2) and a displacement of 5.2 litres and a capacity of 320 hp (LY5).

2013-2014 GMC Yukon Tire Pressure Sensor TPMS Light Reset

Time needed: 17 minutes

If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. To relearn or reset the Tire Pressure Monitoring System (TPMS) sensor on your GMC Yukon you must have a TPMS relearn tool and follow these steps:

  1. Stop the vehicle in a safe place

    Turn the engine switch off and engage the parking brake.

  2. Turn the ignition to the ON position without starting the engine.

    If your car equipped with ignition button, press and hold the Start/Stop button for 5 seconds without touch the brake pedal

  3. Press and hold unlock and lock buttons on the Remote Keyless Entry (RKE) transmitter for 5 seconds

    The horn will sound twice indicates the receiver is in relearn mode

  4. Starting from the driver’s side front tire, place the relearn tool against the tire sidewall, near the valve stem.

    Then press the button to activate the TPMS sensor.

  5. Repeat the procedure on the right-front tire, the right rear tire, and the last one left rear tire.

    A horn chirp confirms that the sensor identification code has been matched to this tire and wheel position.

  6. Turn off the ignition

    Press the Start/Stop button once

  7. Adjust the tire inflation pressure recommended on the tire placard located on the door panel.

    Done!

These instructions are based on the GMC Yukon owner’s manual. This procedure should apply to the third generation of the GMC Yukon (2013 2014 model years). Hopefully, the article 2013-2014 GMC Yukon Tire Pressure Sensor TPMS Light Reset can solve your problem. Good Luck!

Christ

Recent Posts

Exploring the Tech-Advanced Safety Features of Honda Civic

When it comes to safety on the roads, nothing beats the sterling integration of technology…

6 months ago

Mastering Car Oil Changes: Crucial for Business Efficiency

Imagine a car engine as the heart of a business. Without proper and regular maintenance,…

6 months ago

Avoiding Common Car Maintenance Mistakes

Maintaining the health of your car is much like maintaining your health. Ignoring minor symptoms…

6 months ago

Petrol vs Diesel: Unravelling the Used Jeep Wrangler Conundrum

The quest to find the perfect engine variant, when in the market for a used…

6 months ago

Mastering DIY Checks for a Used Jeep Wrangler

When it comes to advancing your automotive acumen, understanding the ins and outs of purchasing…

7 months ago

Key Maintenance Tips for Used Jeep Wranglers

Jeep Wranglers, known for their robust character and off-road prowess, can prove to be resilient…

7 months ago

This website uses cookies.