2008-2016 Chevy Suburban TPMS Tire Pressure Light Reset

2008-2016 Chevy Suburban TPMS Tire Pressure Light Reset – The Chevrolet Suburban, a large SUV, is one of the oldest cars of Chevrolet. The first version of the large and heavy car was already built on 1935. He is still the largest series-produced SUV with up to 9 seats, and a widely used police and military vehicle in the US, where it was marketed as a GMC Suburban. In Australia he was offered briefly as Holden Suburban.

In the 2010 model year in which the US News & World Report has chosen the Suburban as best affordable SUV, a new premium interior package has been introduced, which includes a three-zone climate control, Bluetooth and radio operation of the rear seats. All supplied as standard radio models have a USB port. The 6.0 liter engine is also suitable for E85. Finally, there were minor changes to the front of the vehicle, such as a slightly raised bumper. Side airbags were fitted as standard now.

2008-2016 Chevrolet Suburban TPMS Tire Pressure Light Reset:

To relearn or reset the Tire Pressure Monitoring System (TPMS) sensor on your 2008 2009 2010 2011, 2012, 2013, 2014, 2015 2016 Chevy Suburban you must have a TPMS relearn tool and follow these steps:

  • Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.
  • Turn the ignition to position On without starting the engine.
  • Press and hold unlock and lock buttons on the Remote Keyless Entry (RKE) transmitter until horn sounds
  • If your vehicle does not have Remote Keyless Entry (RKE) transmitter
    • Press the DIC MENU button on the turn signal lever
    • Scroll up and select “Tire Pressure Menu” by use the thumbwheel
    • Press the SET/CLR button
    • When a message requesting acceptance of the process appear, press the SET/CLR button again
      to confirm.
    • The horn sounds twice to signal the receiver is in relearn mode
  • Starting from the driver’s side front tire, place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor.
  • Repeat the procedure on the right-front tire, the right rear tire, and the last one left rear tire.
  • A horn chirp confirms that the sensor identification code has been matched to this tire and wheel position.
  • Turn the ignition off and start the engine to verify the indicator has been reset.

For more details, please watch the following video:

This procedure should be work on latest generation of Chevy Suburban (2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016) models. Hopefully the article of 2008-2016 Chevy Suburban TPMS Tire Pressure Light Reset usefull for you. Good Luck!

(Visited 7,977 times, 5 visits today)
Tagged with: , ,

Leave a Reply

Your email address will not be published. Required fields are marked *