2017-2021 Volvo V90 Maintenance Service Light Reset Guide
Last Updated on March 28, 2021 by Christ
2017-2021 Volvo V90 Maintenance Service Light Reset Guide – The Volvo V90 is a medium-sized family car model produced by the Swedish car manufacturer Volvo. It was presented at the Geneva Motor Show in March 2016 and launched on the market in September of the same year. It can also be had in the off-road version, called Cross Country.
The name V90 in the years 1990-1998 had already been used in the Volvo nomenclature for the 900 Series. The car was built based on SPA (Scalable Product Architecture), which created the second generation of the XC90 model.
2017-2021 Volvo V90 Maintenance Service Light Reset Guide
Time needed: 7 minutes
When the Maintenance Overdue message appears in the display, it’s time for regular service at the workshop. The system must be reset after performed the maintenance service on your vehicle. Here is how to reset the maintenance light on 2017 2018 2019 2020 2021 Volvo V90:
- Turn off the ignition and close all doors
Make sure your vehicle is stopped in a safe place
- Place the ignition to the position I
Turn the START knob clockwise and release it
- Press and hold the (-) REDUCE SPEED button while starting the engine
Hold down the (-) REDUCE SPEED button on the steering wheel and then turn the START knob clockwise with foot on the brake pedal to start the engine
- Keep holding the (-) REDUCE SPEED button until the ℹ️ indicator blinks
Release the button when the warning light flashes 3 times
- If successful, a Maintenance Reminder Reset message will appear on the screen
Done!
These instructions are based on the Volvo V90 owner’s manual. This procedure should apply to the second generation of the Volvo V90 (2017 2018 2019 2020 2021 model years). Hopefully, the article 2017-2021 Volvo V90 Maintenance Service Light Reset Guide can solve your problem. Good Luck!
Leave a Reply